Texas Instruments
Hình ảnh có thể mang tính chất minh họa.
Xem thông số kỹ thuật để biết chi tiết sản phẩm.
TPS24710DGSR
Xem chi tiết DataSheets

TPS24710DGSR

Product Overview

Category

The TPS24710DGSR belongs to the category of power management integrated circuits (PMICs).

Use

It is primarily used for overvoltage protection in various electronic systems.

Characteristics

  • Provides robust overvoltage protection
  • Offers adjustable overvoltage threshold
  • Supports wide input voltage range
  • Features low quiescent current consumption
  • Provides fast response time

Package

The TPS24710DGSR is available in a small 10-pin VSON package.

Essence

The essence of the TPS24710DGSR lies in its ability to protect electronic systems from damaging overvoltage conditions.

Packaging/Quantity

The TPS24710DGSR is typically sold in reels, with 2500 units per reel.

Specifications

  • Input Voltage Range: 2.5V to 18V
  • Overvoltage Threshold Range: 2.6V to 16V
  • Quiescent Current: 1µA (typical)
  • Response Time: <1µs
  • Operating Temperature Range: -40°C to 125°C

Detailed Pin Configuration

The TPS24710DGSR has the following pin configuration:

  1. EN (Enable)
  2. GND (Ground)
  3. VIN (Input Voltage)
  4. OV (Overvoltage Threshold)
  5. PG (Power Good)
  6. FLT (Fault)
  7. NC (No Connection)
  8. NC (No Connection)
  9. NC (No Connection)
  10. VOUT (Output Voltage)

Functional Features

  • Overvoltage Protection: The TPS24710DGSR monitors the input voltage and quickly shuts off the output when an overvoltage condition is detected.
  • Adjustable Threshold: The overvoltage threshold can be adjusted to suit specific system requirements.
  • Power Good Indicator: The PG pin provides a signal indicating the status of the output voltage.
  • Fault Detection: The FLT pin is used to indicate any fault conditions, such as overvoltage or overtemperature.

Advantages and Disadvantages

Advantages

  • Provides reliable overvoltage protection for electronic systems.
  • Adjustable threshold allows customization for different applications.
  • Low quiescent current consumption helps conserve power.
  • Fast response time ensures quick shutdown during overvoltage events.

Disadvantages

  • Limited to a maximum input voltage of 18V.
  • May require additional external components for certain applications.

Working Principles

The TPS24710DGSR works by continuously monitoring the input voltage. When the voltage exceeds the set threshold, it quickly disables the output to protect downstream components. The adjustable threshold allows flexibility in defining the desired overvoltage level.

Detailed Application Field Plans

The TPS24710DGSR can be used in various applications, including: 1. Power supplies 2. Industrial control systems 3. Automotive electronics 4. Telecommunications equipment 5. Consumer electronics

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to the TPS24710DGSR include: 1. TPS24711DGSR 2. TPS24712DGSR 3. TPS24713DGSR 4. TPS24714DGSR

These models provide comparable overvoltage protection features and can be considered as alternatives based on specific application requirements.

Word count: 346 words

Liệt kê 10 câu hỏi và câu trả lời thường gặp liên quan đến ứng dụng TPS24710DGSR trong giải pháp kỹ thuật

Sure! Here are 10 common questions and answers related to the application of TPS24710DGSR in technical solutions:

  1. Q: What is the TPS24710DGSR? A: The TPS24710DGSR is a power distribution switch with an integrated current-limiting feature, designed to protect electronic circuits from overcurrent and short-circuit conditions.

  2. Q: What is the maximum operating voltage of the TPS24710DGSR? A: The TPS24710DGSR can operate at a maximum voltage of 18V.

  3. Q: How does the current-limiting feature of the TPS24710DGSR work? A: The TPS24710DGSR uses a built-in current sense amplifier to monitor the load current. If the current exceeds a set threshold, the device limits the output current to protect the circuit.

  4. Q: Can the TPS24710DGSR be used in automotive applications? A: Yes, the TPS24710DGSR is suitable for automotive applications as it has a wide input voltage range and can withstand harsh operating conditions.

  5. Q: What is the typical current limit of the TPS24710DGSR? A: The TPS24710DGSR has a typical current limit of 1A.

  6. Q: Does the TPS24710DGSR have thermal shutdown protection? A: Yes, the TPS24710DGSR includes thermal shutdown protection to prevent overheating and damage to the device.

  7. Q: Can the TPS24710DGSR be used in battery-powered applications? A: Yes, the TPS24710DGSR is suitable for battery-powered applications as it has a low quiescent current and supports low-power operation.

  8. Q: What is the typical response time of the TPS24710DGSR in limiting the output current? A: The TPS24710DGSR has a typical response time of 1µs.

  9. Q: Can multiple TPS24710DGSR devices be used in parallel to increase the current limit? A: Yes, multiple TPS24710DGSR devices can be used in parallel to increase the overall current limit.

  10. Q: What is the package type of the TPS24710DGSR? A: The TPS24710DGSR is available in a small and compact VSON-8 package for space-constrained applications.

Please note that these answers are based on general information about the TPS24710DGSR and may vary depending on specific application requirements.