Hình ảnh có thể mang tính chất minh họa.
Xem thông số kỹ thuật để biết chi tiết sản phẩm.
TPS2551DBVR

TPS2551DBVR

Product Overview

Category

The TPS2551DBVR belongs to the category of integrated circuits (ICs) and specifically falls under the power management ICs.

Use

This product is primarily used for power distribution and protection in various electronic devices and systems.

Characteristics

  • The TPS2551DBVR is a high-performance, single-channel power-distribution switch.
  • It offers an adjustable current-limiting feature to protect the system from excessive current draw.
  • The device operates within a wide input voltage range, making it suitable for diverse applications.
  • It provides a low on-resistance, minimizing power dissipation and maximizing efficiency.
  • The TPS2551DBVR has a fast response time, ensuring quick shutdown in case of fault conditions.

Package and Quantity

The TPS2551DBVR is available in a small SOT-23 package. It is typically sold in reels containing 3000 units.

Specifications

  • Input Voltage Range: 2.7V to 6.5V
  • Adjustable Current Limit: 100mA to 500mA
  • On-Resistance: 80mΩ (typical)
  • Quiescent Current: 10µA (maximum)
  • Operating Temperature Range: -40°C to +85°C

Pin Configuration

The TPS2551DBVR features a 5-pin SOT-23 package with the following pin configuration:

  1. EN (Enable): Controls the switch operation.
  2. IN (Input): Connects to the input voltage source.
  3. OUT (Output): Connects to the load or downstream circuitry.
  4. GND (Ground): Common ground reference.
  5. ILIM (Current Limit): Sets the desired current limit.

Functional Features

  • Overcurrent Protection: The TPS2551DBVR incorporates an adjustable current-limiting feature to protect the system from excessive current draw.
  • Fast Response Time: In case of a fault condition, the device quickly shuts down to prevent damage to the load or downstream circuitry.
  • Low On-Resistance: The low on-resistance of the switch minimizes power dissipation and ensures efficient power distribution.
  • Wide Input Voltage Range: The TPS2551DBVR operates within a wide input voltage range, making it suitable for various applications.

Advantages and Disadvantages

Advantages

  • Adjustable current limit allows customization based on specific application requirements.
  • Fast response time ensures prompt protection against fault conditions.
  • Low on-resistance results in minimal power dissipation and improved efficiency.
  • Wide input voltage range enhances versatility and compatibility.

Disadvantages

  • Limited maximum current handling capability compared to higher-rated devices.
  • SOT-23 package may not be suitable for applications requiring higher power dissipation.

Working Principles

The TPS2551DBVR functions as a power-distribution switch by controlling the flow of current between the input and output terminals. It utilizes an internal MOSFET transistor to regulate the current passing through the switch. The adjustable current-limiting feature protects the system by limiting the maximum current that can flow through the switch. When the current exceeds the set limit, the device quickly shuts down to prevent damage to the load or downstream circuitry.

Application Field Plans

The TPS2551DBVR finds extensive use in various electronic systems and devices, including but not limited to: - Portable consumer electronics (e.g., smartphones, tablets) - Battery-powered devices - USB-powered devices - Industrial control systems - Automotive electronics - IoT devices

Alternative Models

For users seeking alternative options, the following models provide similar functionality to the TPS2551DBVR: - TPS2552DBVR - TPS2553DBVR - TPS2554DBVR - TPS2555DBVR

These models offer comparable features and specifications, allowing users to choose the most suitable option for their specific application requirements.

In conclusion, the TPS2551DBVR is a high-performance power-distribution switch that offers adjustable current limiting, low on-resistance, and fast response time. It finds applications in various electronic systems and devices, providing efficient power distribution and protection.

Liệt kê 10 câu hỏi và câu trả lời thường gặp liên quan đến ứng dụng TPS2551DBVR trong giải pháp kỹ thuật

Sure! Here are 10 common questions and answers related to the application of TPS2551DBVR in technical solutions:

Q1: What is TPS2551DBVR? A1: TPS2551DBVR is a power distribution switch with an integrated current-limiting feature, designed for use in various technical solutions.

Q2: What is the maximum input voltage supported by TPS2551DBVR? A2: The maximum input voltage supported by TPS2551DBVR is 6.5V.

Q3: Can TPS2551DBVR handle overcurrent conditions? A3: Yes, TPS2551DBVR has built-in overcurrent protection, which limits the output current to a safe level.

Q4: What is the typical operating current range of TPS2551DBVR? A4: The typical operating current range of TPS2551DBVR is from 0mA to 500mA.

Q5: Does TPS2551DBVR have thermal shutdown protection? A5: Yes, TPS2551DBVR includes thermal shutdown protection, which activates when the junction temperature exceeds a certain threshold.

Q6: Can TPS2551DBVR be used in battery-powered applications? A6: Yes, TPS2551DBVR is suitable for battery-powered applications as it has low quiescent current and supports low-voltage operation.

Q7: Is TPS2551DBVR compatible with both digital and analog circuits? A7: Yes, TPS2551DBVR can be used with both digital and analog circuits, making it versatile for various technical solutions.

Q8: What is the typical voltage drop across TPS2551DBVR during normal operation? A8: The typical voltage drop across TPS2551DBVR during normal operation is around 100mV.

Q9: Can TPS2551DBVR be used in automotive applications? A9: Yes, TPS2551DBVR is suitable for automotive applications as it meets the AEC-Q100 qualification requirements.

Q10: Does TPS2551DBVR have reverse polarity protection? A10: No, TPS2551DBVR does not have built-in reverse polarity protection. Additional circuitry may be required to protect against reverse polarity.

Please note that these answers are general and may vary depending on specific application requirements. It is always recommended to refer to the datasheet and consult with the manufacturer for detailed information.