Xem thông số kỹ thuật để biết chi tiết sản phẩm.
TPS26623DRCR
Product Overview
Category
The TPS26623DRCR belongs to the category of integrated circuits (ICs) and specifically falls under the power management ICs.
Use
This IC is primarily used for power monitoring and protection in various electronic systems.
Characteristics
- The TPS26623DRCR is a highly efficient and compact device.
- It offers accurate current and voltage monitoring capabilities.
- This IC provides overcurrent and overvoltage protection.
- It supports a wide input voltage range.
- It has low quiescent current consumption.
- The TPS26623DRCR operates at high switching frequencies.
Package
The TPS26623DRCR comes in a small outline package (SOIC) with 8 pins.
Essence
The essence of the TPS26623DRCR lies in its ability to monitor and protect power supply systems, ensuring safe and reliable operation.
Packaging/Quantity
The TPS26623DRCR is typically packaged in reels or tubes, with a quantity of 2500 units per reel/tube.
Specifications
- Input Voltage Range: 4.5V to 60V
- Output Voltage Range: 0.6V to 57V
- Quiescent Current: 20µA
- Switching Frequency: Up to 2MHz
- Operating Temperature Range: -40°C to +125°C
Detailed Pin Configuration
- VIN: Input voltage pin
- GND: Ground reference pin
- VOUT: Output voltage pin
- FB: Feedback pin for voltage regulation
- EN: Enable pin for device control
- PG: Power good indicator pin
- SS: Soft-start pin for controlled startup
- OCSET: Overcurrent threshold setting pin
Functional Features
- Accurate current and voltage monitoring
- Overcurrent protection with adjustable threshold
- Overvoltage protection with adjustable threshold
- Power good indicator for system status monitoring
- Soft-start function for controlled startup
- Enable pin for device control
Advantages and Disadvantages
Advantages
- High efficiency and compact size
- Wide input voltage range allows for versatile applications
- Accurate monitoring and protection enhance system reliability
- Low quiescent current consumption reduces power losses
- High switching frequencies enable efficient power conversion
Disadvantages
- Limited output voltage range may not suit all applications
- Requires external components for complete power management solution
Working Principles
The TPS26623DRCR operates based on a feedback control mechanism. It continuously monitors the input and output voltages, comparing them to reference values set by the user. If the monitored parameters exceed the predefined thresholds, the IC triggers appropriate protection mechanisms, such as shutting down the output or limiting the current flow.
Detailed Application Field Plans
The TPS26623DRCR finds applications in various fields, including but not limited to: 1. Industrial automation systems 2. Automotive electronics 3. Telecommunications equipment 4. Power supply units 5. Battery charging systems 6. LED lighting systems
Detailed and Complete Alternative Models
- TPS26621DRCR: Similar to TPS26623DRCR, but with a lower input voltage range (4.5V to 36V).
- TPS26622DRCR: Similar to TPS26623DRCR, but with a higher input voltage range (4.5V to 80V).
- TPS26624DRCR: Similar to TPS26623DRCR, but with additional features like temperature monitoring and fault reporting.
These alternative models provide flexibility in choosing the most suitable IC based on specific application requirements.
Word count: 534 words
Liệt kê 10 câu hỏi và câu trả lời thường gặp liên quan đến ứng dụng TPS26623DRCR trong giải pháp kỹ thuật
Sure! Here are 10 common questions and answers related to the application of TPS26623DRCR in technical solutions:
Q: What is TPS26623DRCR? A: TPS26623DRCR is a voltage supervisor and reset IC manufactured by Texas Instruments.
Q: What is the purpose of TPS26623DRCR? A: TPS26623DRCR is designed to monitor the voltage level of a power supply and generate a reset signal when the voltage falls below a certain threshold.
Q: What is the input voltage range supported by TPS26623DRCR? A: TPS26623DRCR supports an input voltage range from 2.5V to 18V.
Q: What is the output voltage of TPS26623DRCR? A: TPS26623DRCR has an open-drain output that can be pulled low to generate a reset signal.
Q: Can TPS26623DRCR be used in battery-powered applications? A: Yes, TPS26623DRCR can be used in battery-powered applications as long as the input voltage is within the supported range.
Q: How does TPS26623DRCR detect undervoltage conditions? A: TPS26623DRCR compares the input voltage with a reference voltage internally and generates a reset signal when the input voltage falls below the reference voltage.
Q: Can TPS26623DRCR be used in high-temperature environments? A: Yes, TPS26623DRCR has a wide operating temperature range of -40°C to 125°C, making it suitable for high-temperature environments.
Q: Does TPS26623DRCR have any built-in delay for the reset signal? A: Yes, TPS26623DRCR has a fixed delay of 200ms for the reset signal to ensure stability during power-up.
Q: Can TPS26623DRCR be used in automotive applications? A: Yes, TPS26623DRCR is qualified for automotive applications and meets the AEC-Q100 standard.
Q: What is the package type of TPS26623DRCR? A: TPS26623DRCR is available in a small 8-pin VSON package, which is suitable for space-constrained designs.
Please note that these answers are general and may vary depending on the specific application and requirements. It's always recommended to refer to the datasheet and consult with the manufacturer for detailed information.