TS5A23167DCURG4

Basic Information Overview

• Category: Integrated Circuit (IC)
• Use: Analog Switch
• Characteristics: Low ON-State Resistance, Low Charge Injection, Wide Voltage Range
• Package: VSSOP (Very Small Outline Package)
• Essence: High-performance analog switch for signal routing applications
• Packaging/Quantity: Tape and Reel, 3000 units per reel

Specifications

• Number of Channels: 1
• ON-State Resistance: 0.6 Ohms (typical)
• Supply Voltage Range: ±2.3V to ±5.5V
• Input Signal Range: -5.5V to +5.5V
• Bandwidth: 200 MHz (typical)
• Crosstalk: -80 dB (typical)
• Leakage Current: 1 nA (maximum)

Detailed Pin Configuration

The TS5A23167DCURG4 has the following pin configuration:

| Pin No. | Pin Name | Description | |---------|----------|-------------| | 1 | IN | Input Control Pin | | 2 | COM | Common Terminal | | 3 | NO | Normally Open Terminal | | 4 | NC | Normally Closed Terminal | | 5 | GND | Ground | | 6 | V+ | Positive Supply Voltage |

Functional Features

• Low ON-State Resistance allows for minimal signal attenuation.
• Low Charge Injection ensures accurate signal transmission.
• Wide Voltage Range enables compatibility with various systems.
• Fast switching speed for seamless signal routing.

Advantages

• High-performance analog switch with low resistance and leakage current.
• Excellent signal integrity due to low charge injection and crosstalk.
• Versatile voltage range allows for compatibility with different applications.
• Compact VSSOP package saves board space.

Disadvantages

• Limited to a single channel, not suitable for multi-channel applications.
• May require additional external components for specific use cases.

Working Principles

The TS5A23167DCURG4 is based on CMOS technology and operates as an analog switch. When the input control pin (IN) is high, the switch connects the common terminal (COM) to the normally open terminal (NO), allowing the signal to pass through. Conversely, when the input control pin is low, the switch connects the common terminal to the normally closed terminal (NC), blocking the signal.

Detailed Application Field Plans

The TS5A23167DCURG4 is commonly used in various applications, including: 1. Audio systems: Signal routing in audio mixers, amplifiers, and headphones. 2. Communication devices: Switching between different antennas or audio sources. 3. Test and measurement equipment: Signal switching for accurate measurements. 4. Industrial automation: Control signal routing in PLCs and industrial machinery. 5. Automotive electronics: Signal routing in infotainment systems and vehicle diagnostics.

Detailed and Complete Alternative Models

1. TS5A23166DCURG4: Similar specifications with dual channels.
2. TS5A23168DCURG4: Similar specifications with triple channels.
3. TS5A23169DCURG4: Similar specifications with quad channels.
4. TS5A23170DCURG4: Similar specifications with higher bandwidth.

(Note: The above alternative models are suggestions and may vary based on availability and specific requirements.)

This entry provides a comprehensive overview of the TS5A23167DCURG4 analog switch, including its basic information, specifications, pin configuration, functional features, advantages, disadvantages, working principles, application field plans, and alternative models.