Hình ảnh có thể mang tính chất minh họa.
Xem thông số kỹ thuật để biết chi tiết sản phẩm.
XC6108C08BGR-G

XC6108C08BGR-G

Product Overview

Category

XC6108C08BGR-G belongs to the category of voltage regulators.

Use

It is commonly used for regulating voltage in electronic circuits.

Characteristics

  • Small size and lightweight
  • Low power consumption
  • High precision voltage regulation
  • Wide input voltage range
  • Overcurrent protection
  • Thermal shutdown protection

Package

XC6108C08BGR-G is available in a compact SOT-23-5 package.

Essence

The essence of XC6108C08BGR-G lies in its ability to provide stable and regulated voltage output for various electronic devices.

Packaging/Quantity

It is typically packaged in reels, with each reel containing a specific quantity of XC6108C08BGR-G units.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage: 0.8V
  • Output Current: 150mA
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 40µA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6108C08BGR-G has the following pin configuration:

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. NC (No Connection)
  4. EN (Enable)
  5. VOUT (Output Voltage)

Functional Features

  • Voltage regulation: XC6108C08BGR-G ensures a stable output voltage regardless of input voltage fluctuations.
  • Overcurrent protection: It safeguards the circuit by limiting the output current in case of excessive load.
  • Thermal shutdown protection: In the event of high temperature, the device automatically shuts down to prevent damage.

Advantages and Disadvantages

Advantages

  • Compact size and lightweight make it suitable for space-constrained applications.
  • Low power consumption helps in energy-efficient designs.
  • Wide input voltage range allows compatibility with various power sources.
  • Overcurrent and thermal shutdown protection enhance circuit reliability.

Disadvantages

  • Limited output current may not be suitable for high-power applications.
  • The absence of adjustable output voltage restricts flexibility in certain designs.

Working Principles

XC6108C08BGR-G operates based on the principle of feedback control. It compares the output voltage with a reference voltage and adjusts the internal circuitry to maintain a constant output voltage, compensating for any variations in the input voltage or load conditions.

Detailed Application Field Plans

XC6108C08BGR-G finds applications in various electronic devices, including but not limited to: - Mobile phones - Portable media players - Digital cameras - Wearable devices - IoT modules

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6108C08BGR-G are: - XC6208C08BGR-G: Similar specifications but with an adjustable output voltage feature. - XC6118C08BGR-G: Higher output current capability (300mA) for more demanding applications. - XC6120C08BGR-G: Lower quiescent current (20µA) for ultra-low power designs.

Note: The above alternative models are from the same series and share similar characteristics.

This concludes the encyclopedia entry for XC6108C08BGR-G, providing comprehensive information about its category, use, characteristics, package, specifications, pin configuration, functional features, advantages and disadvantages, working principles, detailed application field plans, and alternative models.

Liệt kê 10 câu hỏi và câu trả lời thường gặp liên quan đến ứng dụng XC6108C08BGR-G trong giải pháp kỹ thuật

Sure! Here are 10 common questions and answers related to the application of XC6108C08BGR-G in technical solutions:

  1. Q: What is XC6108C08BGR-G? A: XC6108C08BGR-G is a voltage detector IC (integrated circuit) that monitors the power supply voltage and provides a reset signal when the voltage drops below a specified threshold.

  2. Q: What is the operating voltage range of XC6108C08BGR-G? A: The operating voltage range of XC6108C08BGR-G is typically between 0.9V and 6.0V.

  3. Q: How does XC6108C08BGR-G help in technical solutions? A: XC6108C08BGR-G helps in technical solutions by ensuring proper system operation and preventing data corruption or malfunctioning due to low voltage conditions.

  4. Q: Can XC6108C08BGR-G be used in battery-powered applications? A: Yes, XC6108C08BGR-G can be used in battery-powered applications as it has a low quiescent current consumption of typically 1.0µA.

  5. Q: What is the output type of XC6108C08BGR-G? A: XC6108C08BGR-G has an open-drain output type, which allows for flexibility in connecting external components.

  6. Q: What is the typical reset threshold voltage of XC6108C08BGR-G? A: The typical reset threshold voltage of XC6108C08BGR-G is 0.8V.

  7. Q: Does XC6108C08BGR-G have a built-in delay time for the reset signal? A: Yes, XC6108C08BGR-G has a built-in delay time of typically 200ms to ensure stable power supply before releasing the reset signal.

  8. Q: Can XC6108C08BGR-G be used in automotive applications? A: Yes, XC6108C08BGR-G is suitable for automotive applications as it meets the AEC-Q100 Grade 2 qualification standards.

  9. Q: What is the package type of XC6108C08BGR-G? A: XC6108C08BGR-G is available in a small SOT-25 package, which is compact and easy to integrate into various designs.

  10. Q: Is XC6108C08BGR-G RoHS compliant? A: Yes, XC6108C08BGR-G is RoHS (Restriction of Hazardous Substances) compliant, ensuring environmental friendliness and safety.

Please note that the answers provided here are general and may vary depending on the specific datasheet and manufacturer's specifications of XC6108C08BGR-G.