Xem thông số kỹ thuật để biết chi tiết sản phẩm.
XC6108C40DGR-G
Product Overview
Category
XC6108C40DGR-G belongs to the category of voltage regulators.
Use
It is commonly used in electronic circuits to regulate and stabilize voltage levels.
Characteristics
- Voltage regulation
- Stabilization of voltage levels
- Compact size
- Low power consumption
Package
XC6108C40DGR-G comes in a small surface-mount package.
Essence
The essence of XC6108C40DGR-G lies in its ability to provide stable voltage output for various electronic devices.
Packaging/Quantity
XC6108C40DGR-G is typically packaged in reels and is available in quantities of 1000 units per reel.
Specifications
- Input Voltage Range: 2.5V - 6.0V
- Output Voltage: 4.0V
- Output Current: 150mA
- Dropout Voltage: 200mV (typical)
- Quiescent Current: 30µA (typical)
- Operating Temperature Range: -40°C to +85°C
Detailed Pin Configuration
XC6108C40DGR-G has the following pin configuration:
- VIN (Input Voltage)
- GND (Ground)
- VOUT (Output Voltage)
Functional Features
- Voltage regulation: XC6108C40DGR-G ensures a stable output voltage regardless of input voltage fluctuations.
- Overcurrent protection: It incorporates overcurrent protection to safeguard connected devices.
- Thermal shutdown: The regulator automatically shuts down when it reaches a certain temperature, preventing damage due to overheating.
- Low quiescent current: The low quiescent current ensures minimal power consumption during standby or idle states.
Advantages and Disadvantages
Advantages
- Compact size allows for easy integration into space-constrained designs.
- Wide input voltage range provides flexibility in various applications.
- Low dropout voltage minimizes power loss.
- Overcurrent protection ensures the safety of connected devices.
Disadvantages
- Limited output current may not be suitable for high-power applications.
- Operating temperature range may restrict usage in extreme environments.
Working Principles
XC6108C40DGR-G operates based on a feedback control mechanism. It compares the output voltage with a reference voltage and adjusts the internal circuitry to maintain a stable output voltage. This feedback loop continuously monitors and regulates the output voltage, compensating for any variations in the input voltage or load conditions.
Detailed Application Field Plans
XC6108C40DGR-G finds applications in various electronic devices and systems, including but not limited to: - Battery-powered devices - Portable consumer electronics - IoT devices - Automotive electronics - Industrial control systems
Detailed and Complete Alternative Models
Some alternative models that can be considered as alternatives to XC6108C40DGR-G are: - LM1117-4.0 - MCP1700-4002E/TO - TS2937CP-4.0
These models offer similar voltage regulation capabilities and can be used as substitutes depending on specific requirements and availability.
Word count: 372 words
Liệt kê 10 câu hỏi và câu trả lời thường gặp liên quan đến ứng dụng XC6108C40DGR-G trong giải pháp kỹ thuật
Sure! Here are 10 common questions and answers related to the application of XC6108C40DGR-G in technical solutions:
Q: What is XC6108C40DGR-G? A: XC6108C40DGR-G is a voltage detector IC (integrated circuit) that monitors the power supply voltage and provides a reset signal when the voltage drops below a certain threshold.
Q: What is the operating voltage range of XC6108C40DGR-G? A: The operating voltage range of XC6108C40DGR-G is typically between 0.9V and 6.0V.
Q: How does XC6108C40DGR-G help in technical solutions? A: XC6108C40DGR-G helps in technical solutions by ensuring proper system operation and preventing data corruption or malfunctioning due to low voltage conditions.
Q: Can XC6108C40DGR-G be used in battery-powered applications? A: Yes, XC6108C40DGR-G can be used in battery-powered applications as it has a low quiescent current consumption of typically 1.0µA.
Q: What is the typical reset threshold voltage of XC6108C40DGR-G? A: The typical reset threshold voltage of XC6108C40DGR-G is 4.0V.
Q: Does XC6108C40DGR-G have an adjustable reset threshold voltage? A: No, XC6108C40DGR-G does not have an adjustable reset threshold voltage. It has a fixed threshold voltage of 4.0V.
Q: Is XC6108C40DGR-G suitable for automotive applications? A: Yes, XC6108C40DGR-G is suitable for automotive applications as it meets the AEC-Q100 Grade 2 qualification standards.
Q: Can XC6108C40DGR-G be used in industrial control systems? A: Yes, XC6108C40DGR-G can be used in industrial control systems as it operates reliably in a wide temperature range of -40°C to +85°C.
Q: Does XC6108C40DGR-G have any built-in delay time for the reset signal? A: Yes, XC6108C40DGR-G has a built-in delay time of typically 200ms to ensure stable power supply before releasing the reset signal.
Q: What package does XC6108C40DGR-G come in? A: XC6108C40DGR-G comes in a small SOT-25 package, which is compact and suitable for space-constrained applications.
Please note that the answers provided here are general and may vary depending on the specific datasheet and manufacturer's specifications of XC6108C40DGR-G.