Xem thông số kỹ thuật để biết chi tiết sản phẩm.
XC6118C48BGR-G
Product Overview
Category
XC6118C48BGR-G belongs to the category of voltage regulators.
Use
It is commonly used for regulating voltage in electronic circuits.
Characteristics
- Package: BGA (Ball Grid Array)
- Essence: Voltage regulator IC (Integrated Circuit)
- Packaging/Quantity: Tape and Reel, 3000 pieces per reel
Specifications
The specifications of XC6118C48BGR-G are as follows:
- Input Voltage Range: 2.5V - 6.0V
- Output Voltage Range: 1.2V - 5.5V
- Output Current: 150mA
- Dropout Voltage: 200mV (typical)
- Quiescent Current: 30µA (typical)
- Operating Temperature Range: -40°C to +85°C
Detailed Pin Configuration
XC6118C48BGR-G has the following pin configuration:
- VIN: Input voltage pin
- GND: Ground pin
- EN: Enable pin
- VOUT: Output voltage pin
- NC: No connection pin
Functional Features
The functional features of XC6118C48BGR-G include:
- Low dropout voltage
- Low quiescent current
- Overcurrent protection
- Thermal shutdown protection
- Short-circuit protection
Advantages and Disadvantages
Advantages: - Small package size - Wide input voltage range - Low dropout voltage - Overcurrent and short-circuit protection
Disadvantages: - Limited output current capacity (150mA)
Working Principles
XC6118C48BGR-G works by regulating the input voltage to a stable output voltage. It uses internal circuitry to monitor and adjust the voltage levels. The enable pin allows the device to be turned on or off as needed.
Detailed Application Field Plans
XC6118C48BGR-G can be used in various applications, including but not limited to: - Battery-powered devices - Portable electronic devices - IoT (Internet of Things) devices - Consumer electronics - Automotive electronics
Detailed and Complete Alternative Models
Some alternative models that can be considered as alternatives to XC6118C48BGR-G are: - XC6206P332MR-G - LM1117IMPX-3.3/NOPB - MCP1700T-3302E/TT
These models offer similar functionality and specifications, providing options for different design requirements.
In conclusion, XC6118C48BGR-G is a voltage regulator IC with a small package size, wide input voltage range, and various protection features. It is commonly used in battery-powered devices, portable electronics, and IoT applications. Alternative models such as XC6206P332MR-G, LM1117IMPX-3.3/NOPB, and MCP1700T-3302E/TT can also be considered for similar applications.
Liệt kê 10 câu hỏi và câu trả lời thường gặp liên quan đến ứng dụng XC6118C48BGR-G trong giải pháp kỹ thuật
Sure! Here are 10 common questions and answers related to the application of XC6118C48BGR-G in technical solutions:
Q: What is XC6118C48BGR-G? A: XC6118C48BGR-G is a voltage detector IC (integrated circuit) that monitors the power supply voltage and provides a reset signal when the voltage drops below a certain threshold.
Q: What is the operating voltage range of XC6118C48BGR-G? A: The operating voltage range of XC6118C48BGR-G is typically between 0.9V and 6.0V.
Q: How does XC6118C48BGR-G help in technical solutions? A: XC6118C48BGR-G helps in technical solutions by providing a reliable reset signal to microcontrollers, DSPs, or other digital devices when the power supply voltage falls below a specified level, ensuring proper system initialization.
Q: What is the output type of XC6118C48BGR-G? A: XC6118C48BGR-G has an open-drain output type, which means it can be connected to other devices with a pull-up resistor to achieve the desired logic level.
Q: What is the typical reset threshold voltage of XC6118C48BGR-G? A: The typical reset threshold voltage of XC6118C48BGR-G is 4.8V.
Q: Can XC6118C48BGR-G be used in battery-powered applications? A: Yes, XC6118C48BGR-G can be used in battery-powered applications as it has a low quiescent current consumption of typically 1.0µA.
Q: Does XC6118C48BGR-G have a built-in delay circuit? A: Yes, XC6118C48BGR-G has a built-in delay circuit that provides an adjustable reset delay time to ensure stable power supply voltage before releasing the reset signal.
Q: What is the temperature range of XC6118C48BGR-G? A: The temperature range of XC6118C48BGR-G is typically between -40°C and +85°C.
Q: Can XC6118C48BGR-G be used in automotive applications? A: Yes, XC6118C48BGR-G is suitable for automotive applications as it meets the AEC-Q100 Grade 2 qualification standards.
Q: Is XC6118C48BGR-G available in different package options? A: Yes, XC6118C48BGR-G is available in various package options, including SOT-25, SOT-89, and USP-4B, providing flexibility for different design requirements.
Please note that the answers provided here are general and may vary depending on the specific datasheet and manufacturer's specifications of XC6118C48BGR-G.