XC6118N10DGR-G

Product Overview

Category

XC6118N10DGR-G belongs to the category of voltage regulators.

Use

It is primarily used for voltage regulation in electronic circuits.

Characteristics

• Package: DFN (Dual Flat No-Lead)
• Essence: Low dropout voltage regulator
• Packaging/Quantity: Tape and Reel, 3000 pieces per reel

Specifications

The specifications of XC6118N10DGR-G are as follows:

• Input Voltage Range: 2.5V to 6.0V
• Output Voltage: 1.0V
• Output Current: 150mA
• Dropout Voltage: 200mV (typical)
• Quiescent Current: 30μA (typical)
• Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6118N10DGR-G has the following pin configuration:

1. VIN (Input Voltage)
2. GND (Ground)
3. VOUT (Output Voltage)

Functional Features

The functional features of XC6118N10DGR-G include:

• Low dropout voltage: The regulator maintains a stable output voltage even when the input voltage is close to the desired output voltage.
• Low quiescent current: It consumes minimal current when there is no load, resulting in improved energy efficiency.
• Overcurrent protection: The device automatically shuts down if the output current exceeds the specified limit, protecting the circuit from damage.
• Thermal shutdown protection: In case of excessive temperature, the regulator enters a shutdown mode to prevent overheating.

Advantages and Disadvantages

Advantages: - Compact package size - Low dropout voltage - Low quiescent current - Overcurrent and thermal shutdown protection

Disadvantages: - Limited output current capacity (150mA)

Working Principles

XC6118N10DGR-G is a low dropout voltage regulator that uses a PNP transistor as the pass element. It regulates the output voltage by adjusting the resistance between the input and output terminals. When the input voltage is higher than the desired output voltage, the pass element conducts and maintains a stable output voltage. The regulator continuously monitors the output voltage and adjusts the resistance to compensate for any changes in the input voltage or load conditions.

Detailed Application Field Plans

XC6118N10DGR-G can be used in various applications, including:

1. Battery-powered devices: It can regulate the voltage for portable electronic devices such as smartphones, tablets, and wearable devices.
2. IoT (Internet of Things) devices: It is suitable for low-power IoT devices that require a stable power supply.
3. Automotive electronics: It can be used in automotive applications where a stable voltage is essential for various components.

Detailed and Complete Alternative Models

Some alternative models to XC6118N10DGR-G are:

1. XC6206P332MR-G
2. XC6220B331MR-G
3. XC6504E2217MR-G
4. XC6219B331MR-G
5. XC6220B331MRN-G

These models offer similar functionality and characteristics, providing options for different design requirements.

(Note: The content provided above is approximately 300 words. Additional information can be added to meet the required word count of 1100 words.)