Torex Semiconductor Ltd
Hình ảnh có thể mang tính chất minh họa.
Xem thông số kỹ thuật để biết chi tiết sản phẩm.
XC6118N11AGR-G
Xem chi tiết DataSheets

XC6118N11AGR-G

Product Overview

Category

XC6118N11AGR-G belongs to the category of voltage regulators.

Use

It is commonly used for regulating voltage in electronic circuits.

Characteristics

  • Low dropout voltage
  • High output voltage accuracy
  • Low quiescent current
  • Overcurrent protection
  • Thermal shutdown protection

Package

XC6118N11AGR-G is available in a small SOT-23-5 package.

Essence

The essence of XC6118N11AGR-G lies in its ability to regulate voltage efficiently and accurately.

Packaging/Quantity

This product is typically packaged in reels, with a quantity of 3000 units per reel.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage: 1.1V
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 30μA (typical)
  • Output Current: 150mA (maximum)

Detailed Pin Configuration

XC6118N11AGR-G has the following pin configuration:

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. NC (No Connection)
  4. EN (Enable)
  5. VOUT (Output Voltage)

Functional Features

  • Low dropout voltage ensures efficient regulation even with low input voltages.
  • High output voltage accuracy provides precise voltage regulation.
  • Low quiescent current minimizes power consumption when the regulator is idle.
  • Overcurrent protection safeguards the circuit from excessive current flow.
  • Thermal shutdown protection prevents damage due to overheating.

Advantages and Disadvantages

Advantages

  • Efficient voltage regulation
  • Accurate output voltage
  • Low power consumption
  • Protection against overcurrent and overheating

Disadvantages

  • Limited maximum output current (150mA)

Working Principles

XC6118N11AGR-G operates by comparing the output voltage with a reference voltage. It adjusts the resistance in the regulator circuit to maintain a constant output voltage, regardless of changes in the input voltage or load conditions.

Detailed Application Field Plans

XC6118N11AGR-G finds applications in various electronic devices and systems, including: - Mobile phones - Portable media players - Digital cameras - Wireless communication devices - Battery-powered devices

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to XC6118N11AGR-G are: - XC6206P332MR-G - LM1117IMPX-3.3/NOPB - MCP1700T-3302E/TT

Liệt kê 10 câu hỏi và câu trả lời thường gặp liên quan đến ứng dụng XC6118N11AGR-G trong giải pháp kỹ thuật

Sure! Here are 10 common questions and answers related to the application of XC6118N11AGR-G in technical solutions:

1. What is XC6118N11AGR-G? - XC6118N11AGR-G is a low-power voltage detector IC manufactured by Torex Semiconductor. It is commonly used in various electronic devices to monitor the power supply voltage and provide a reset signal when the voltage drops below a certain threshold.

2. What is the operating voltage range of XC6118N11AGR-G? - The operating voltage range of XC6118N11AGR-G is typically between 0.9V and 6.0V.

3. How does XC6118N11AGR-G work? - XC6118N11AGR-G continuously monitors the input voltage and compares it with a reference voltage. When the input voltage falls below the reference voltage, it generates a reset signal to indicate a power failure or low voltage condition.

4. What is the typical current consumption of XC6118N11AGR-G? - The typical current consumption of XC6118N11AGR-G is very low, usually around 1.5µA.

5. Can XC6118N11AGR-G be used in battery-powered applications? - Yes, XC6118N11AGR-G is suitable for battery-powered applications due to its low current consumption, which helps to conserve battery life.

6. What is the output type of XC6118N11AGR-G? - XC6118N11AGR-G has an open-drain output, which means it can be connected to other devices or microcontrollers with a pull-up resistor to achieve the desired logic level.

7. What is the reset delay time of XC6118N11AGR-G? - The reset delay time of XC6118N11AGR-G is typically 200ms, which provides sufficient time for the power supply to stabilize before releasing the reset signal.

8. Can XC6118N11AGR-G be used in automotive applications? - Yes, XC6118N11AGR-G is AEC-Q100 qualified and can be used in automotive applications where reliable voltage monitoring and reset functionality are required.

9. What is the temperature range of XC6118N11AGR-G? - The operating temperature range of XC6118N11AGR-G is typically between -40°C and +85°C, making it suitable for a wide range of environments.

10. Is XC6118N11AGR-G available in different package options? - Yes, XC6118N11AGR-G is available in various package options, including SOT-25, SOT-89, and USP-4C, allowing flexibility in design and integration into different systems.

Please note that the answers provided here are general and may vary depending on the specific datasheet and application requirements.