Xem thông số kỹ thuật để biết chi tiết sản phẩm.
XC6118N25CGR-G
Product Overview
Category
XC6118N25CGR-G belongs to the category of voltage regulators.
Use
It is commonly used in electronic circuits to regulate and stabilize voltage levels.
Characteristics
- Voltage regulation: XC6118N25CGR-G provides a stable output voltage.
- Low dropout voltage: It operates efficiently even when the input voltage is close to the output voltage.
- Low quiescent current: The regulator consumes minimal current when no load is connected.
- Thermal shutdown protection: It automatically shuts down to prevent damage from excessive heat.
- Short-circuit protection: It safeguards against short circuits, preventing damage to the circuitry.
Package
XC6118N25CGR-G is available in a compact surface-mount package.
Essence
The essence of XC6118N25CGR-G lies in its ability to regulate voltage effectively and efficiently.
Packaging/Quantity
It is typically packaged in reels or tubes, with a quantity of several hundred units per package.
Specifications
- Input voltage range: 2.5V - 6.0V
- Output voltage: 1.8V
- Maximum output current: 150mA
- Dropout voltage: 200mV (at 100mA)
- Quiescent current: 30µA (typical)
- Operating temperature range: -40°C to +85°C
Detailed Pin Configuration
XC6118N25CGR-G has the following pin configuration:
- VIN: Input voltage pin
- GND: Ground pin
- VOUT: Output voltage pin
Functional Features
- Voltage regulation: Maintains a stable output voltage regardless of input variations.
- Low dropout voltage: Operates efficiently even with small voltage differences between input and output.
- Low quiescent current: Consumes minimal current when no load is connected.
- Thermal shutdown protection: Automatically shuts down to prevent overheating.
- Short-circuit protection: Safeguards against short circuits, protecting the circuitry.
Advantages and Disadvantages
Advantages
- Efficient voltage regulation
- Low dropout voltage
- Minimal quiescent current consumption
- Protection against thermal shutdown and short circuits
Disadvantages
- Limited maximum output current (150mA)
- Restricted input voltage range (2.5V - 6.0V)
Working Principles
XC6118N25CGR-G utilizes internal circuitry to regulate the output voltage. It compares the reference voltage with the feedback voltage and adjusts the pass transistor accordingly to maintain a stable output voltage.
Detailed Application Field Plans
XC6118N25CGR-G finds applications in various electronic devices and systems, including: - Battery-powered devices - Portable electronics - IoT devices - Automotive electronics - Industrial control systems
Detailed and Complete Alternative Models
Some alternative models that can be considered as alternatives to XC6118N25CGR-G are: - LM1117-1.8 - MCP1700-1802E/TO - LP2985-18DBVR - TPS73618DBVR
These models offer similar voltage regulation capabilities and can be used as substitutes depending on specific requirements.
Word count: 366 words
Liệt kê 10 câu hỏi và câu trả lời thường gặp liên quan đến ứng dụng XC6118N25CGR-G trong giải pháp kỹ thuật
Sure! Here are 10 common questions and answers related to the application of XC6118N25CGR-G in technical solutions:
Q: What is XC6118N25CGR-G? A: XC6118N25CGR-G is a voltage detector IC (integrated circuit) that monitors the power supply voltage and provides a reset signal when the voltage drops below a specified threshold.
Q: What is the operating voltage range of XC6118N25CGR-G? A: The operating voltage range of XC6118N25CGR-G is typically between 0.9V and 6.0V.
Q: How does XC6118N25CGR-G help in technical solutions? A: XC6118N25CGR-G helps in technical solutions by providing a reliable reset signal to microcontrollers, microprocessors, or other digital circuits when the power supply voltage falls below a certain level, ensuring proper system initialization.
Q: What is the output type of XC6118N25CGR-G? A: XC6118N25CGR-G has an open-drain output type, which means it can be connected to other devices with a pull-up resistor to achieve the desired logic level.
Q: What is the typical reset threshold voltage of XC6118N25CGR-G? A: The typical reset threshold voltage of XC6118N25CGR-G is 2.5V.
Q: Can XC6118N25CGR-G be used in battery-powered applications? A: Yes, XC6118N25CGR-G can be used in battery-powered applications as it operates within a wide voltage range and consumes very low quiescent current.
Q: Does XC6118N25CGR-G have any built-in delay for the reset signal? A: Yes, XC6118N25CGR-G has a built-in delay of approximately 200ms to ensure stable power supply before releasing the reset signal.
Q: Is XC6118N25CGR-G suitable for automotive applications? A: Yes, XC6118N25CGR-G is suitable for automotive applications as it meets the necessary quality and reliability standards required for such environments.
Q: Can XC6118N25CGR-G be used in industrial control systems? A: Absolutely, XC6118N25CGR-G can be used in industrial control systems to monitor power supply voltage and provide reliable reset functionality to ensure proper system operation.
Q: Are there any specific precautions to consider when using XC6118N25CGR-G? A: It is important to follow the manufacturer's datasheet and application notes for proper usage and recommended external component values. Additionally, attention should be given to the maximum ratings and operating conditions specified in the datasheet to ensure reliable performance.