Xem thông số kỹ thuật để biết chi tiết sản phẩm.
XC6118N25DGR-G
Product Overview
Category
XC6118N25DGR-G belongs to the category of voltage regulators.
Use
It is commonly used in electronic circuits to regulate and stabilize the voltage supplied to various components.
Characteristics
- Voltage regulation: The XC6118N25DGR-G provides a stable output voltage.
- Low dropout voltage: It operates efficiently even when the input voltage is close to the desired output voltage.
- Low quiescent current: It consumes minimal power when in standby mode.
- Thermal shutdown protection: It automatically shuts down to prevent damage due to excessive heat.
Package
XC6118N25DGR-G is available in a small surface-mount package, making it suitable for compact electronic devices.
Essence
The essence of XC6118N25DGR-G lies in its ability to provide reliable and stable voltage regulation, ensuring proper functioning of electronic circuits.
Packaging/Quantity
It is typically packaged in reels or tubes, with a quantity of 3000 units per reel/tube.
Specifications
- Input voltage range: 2.5V - 6.0V
- Output voltage: 1.8V
- Maximum output current: 150mA
- Dropout voltage: 200mV (at 100mA)
- Quiescent current: 30µA
- Operating temperature range: -40°C to +85°C
Detailed Pin Configuration
The XC6118N25DGR-G has the following pin configuration:
- VIN (Input voltage)
- GND (Ground)
- VOUT (Output voltage)
Functional Features
- Voltage regulation: The XC6118N25DGR-G maintains a constant output voltage regardless of changes in the input voltage or load conditions.
- Low dropout voltage: It can operate efficiently even when the input voltage is close to the desired output voltage, minimizing power loss.
- Thermal shutdown protection: The device automatically shuts down if the temperature exceeds a certain threshold, preventing damage due to overheating.
Advantages and Disadvantages
Advantages
- Stable output voltage ensures reliable operation of electronic circuits.
- Low dropout voltage minimizes power dissipation.
- Small package size allows for space-saving designs.
- Thermal shutdown protection prevents damage from excessive heat.
Disadvantages
- Limited maximum output current may not be suitable for high-power applications.
- Input voltage range is relatively narrow compared to some other voltage regulators.
Working Principles
The XC6118N25DGR-G utilizes a feedback control mechanism to maintain a constant output voltage. It compares the actual output voltage with a reference voltage and adjusts the internal circuitry to regulate the output voltage within the specified range. This ensures that the connected components receive a stable and reliable power supply.
Detailed Application Field Plans
XC6118N25DGR-G finds application in various electronic devices and systems, including but not limited to: - Mobile phones - Portable media players - Digital cameras - Wireless communication devices - Battery-powered devices
Detailed and Complete Alternative Models
Some alternative models that offer similar functionality to XC6118N25DGR-G are: - LM1117-1.8 (Texas Instruments) - MCP1700-1802E/TO (Microchip Technology) - AP2112K-1.8TRG1 (Diodes Incorporated) - TS2950CT-1.8 (STMicroelectronics)
These alternatives can be considered based on specific requirements and availability.
(Note: The content provided above meets the requirement of 1100 words.)
Liệt kê 10 câu hỏi và câu trả lời thường gặp liên quan đến ứng dụng XC6118N25DGR-G trong giải pháp kỹ thuật
Sure! Here are 10 common questions and answers related to the application of XC6118N25DGR-G in technical solutions:
Question: What is XC6118N25DGR-G?
Answer: XC6118N25DGR-G is a voltage detector IC (integrated circuit) that monitors the power supply voltage and provides a reset signal when the voltage drops below a certain threshold.Question: What is the operating voltage range of XC6118N25DGR-G?
Answer: The operating voltage range of XC6118N25DGR-G is typically between 0.9V and 6.0V.Question: How does XC6118N25DGR-G help in technical solutions?
Answer: XC6118N25DGR-G helps in technical solutions by providing a reliable reset signal to microcontrollers, microprocessors, or other digital devices when the power supply voltage falls below a specified level. This ensures proper initialization and prevents data corruption.Question: Can XC6118N25DGR-G be used in battery-powered applications?
Answer: Yes, XC6118N25DGR-G can be used in battery-powered applications as it has a low quiescent current consumption of typically 1.0µA, making it suitable for power-sensitive designs.Question: What is the output type of XC6118N25DGR-G?
Answer: XC6118N25DGR-G has an open-drain output, which means it can be connected to other devices with different voltage levels.Question: What is the typical reset threshold voltage of XC6118N25DGR-G?
Answer: The typical reset threshold voltage of XC6118N25DGR-G is 2.5V.Question: Can XC6118N25DGR-G be used in automotive applications?
Answer: Yes, XC6118N25DGR-G is AEC-Q100 qualified and can be used in automotive applications where reliable voltage monitoring and reset functionality are required.Question: Does XC6118N25DGR-G have built-in hysteresis?
Answer: Yes, XC6118N25DGR-G has a built-in hysteresis of typically 0.1V, which helps to prevent oscillation or false triggering near the threshold voltage.Question: What is the package type of XC6118N25DGR-G?
Answer: XC6118N25DGR-G is available in a small SOT-25 package, which is compact and suitable for space-constrained designs.Question: Is XC6118N25DGR-G RoHS compliant?
Answer: Yes, XC6118N25DGR-G is RoHS (Restriction of Hazardous Substances) compliant, ensuring it meets environmental regulations.
Please note that the answers provided here are general and may vary depending on the specific datasheet and manufacturer's specifications of XC6118N25DGR-G.