Torex Semiconductor Ltd
Hình ảnh có thể mang tính chất minh họa.
Xem thông số kỹ thuật để biết chi tiết sản phẩm.
XC6118N46DGR-G
Xem chi tiết DataSheets

XC6118N46DGR-G

Product Overview

Category

XC6118N46DGR-G belongs to the category of voltage regulators.

Use

It is primarily used for regulating voltage in electronic circuits.

Characteristics

  • Package: DFN (Dual Flat No-leads)
  • Essence: Low dropout voltage regulator
  • Packaging/Quantity: Tape and Reel, 3000 pieces per reel

Specifications

The specifications of XC6118N46DGR-G are as follows:

  • Input Voltage Range: 2.5V to 6.0V
  • Output Voltage: 4.6V
  • Dropout Voltage: 200mV (typical)
  • Output Current: 150mA (maximum)
  • Quiescent Current: 30µA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6118N46DGR-G has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. VOUT: Output voltage pin
  4. CE: Chip enable pin

Functional Features

The functional features of XC6118N46DGR-G include:

  • Low dropout voltage
  • Low quiescent current
  • Overcurrent protection
  • Thermal shutdown protection
  • Short-circuit protection

Advantages and Disadvantages

Advantages: - Low dropout voltage ensures efficient regulation - Low quiescent current minimizes power consumption - Overcurrent, thermal shutdown, and short-circuit protections enhance reliability

Disadvantages: - Limited output current capacity (150mA maximum)

Working Principles

XC6118N46DGR-G works by regulating the input voltage to a stable output voltage of 4.6V. It achieves this through a combination of internal circuitry that adjusts the voltage difference between the input and output. The low dropout voltage ensures efficient regulation even when the input voltage is close to the desired output voltage.

Detailed Application Field Plans

XC6118N46DGR-G finds applications in various electronic devices, including but not limited to: - Battery-powered devices - Portable consumer electronics - IoT (Internet of Things) devices - Wearable devices

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6118N46DGR-G are: - XC6118N46AGR-G - XC6118N46BGR-G - XC6118N46CGR-G

These models have similar specifications and functionality, providing flexibility in choosing the most suitable voltage regulator for specific applications.

Word count: 305 words

Liệt kê 10 câu hỏi và câu trả lời thường gặp liên quan đến ứng dụng XC6118N46DGR-G trong giải pháp kỹ thuật

Sure! Here are 10 common questions and answers related to the application of XC6118N46DGR-G in technical solutions:

  1. Q: What is XC6118N46DGR-G? A: XC6118N46DGR-G is a voltage detector IC (Integrated Circuit) manufactured by Torex Semiconductor. It is commonly used for monitoring power supply voltages in various electronic devices.

  2. Q: What is the operating voltage range of XC6118N46DGR-G? A: The operating voltage range of XC6118N46DGR-G is typically between 0.9V and 6.0V.

  3. Q: How does XC6118N46DGR-G work? A: XC6118N46DGR-G works by comparing the input voltage with a fixed reference voltage. When the input voltage falls below a certain threshold, it triggers an output signal indicating a low voltage condition.

  4. Q: What is the output type of XC6118N46DGR-G? A: XC6118N46DGR-G has an open-drain output type, which means it can be connected to other devices using a pull-up resistor to achieve different logic levels.

  5. Q: What is the typical quiescent current consumption of XC6118N46DGR-G? A: The typical quiescent current consumption of XC6118N46DGR-G is very low, usually around 1.0µA.

  6. Q: Can XC6118N46DGR-G be used for overvoltage protection? A: No, XC6118N46DGR-G is specifically designed for undervoltage detection and does not provide overvoltage protection.

  7. Q: What is the accuracy of the voltage detection threshold in XC6118N46DGR-G? A: The accuracy of the voltage detection threshold in XC6118N46DGR-G is typically ±1.5%.

  8. Q: Can XC6118N46DGR-G be used in automotive applications? A: Yes, XC6118N46DGR-G is suitable for automotive applications as it meets the necessary quality and reliability standards.

  9. Q: Does XC6118N46DGR-G have built-in hysteresis? A: Yes, XC6118N46DGR-G has a built-in hysteresis feature to prevent oscillation caused by noise or voltage fluctuations near the detection threshold.

  10. Q: What is the package type of XC6118N46DGR-G? A: XC6118N46DGR-G is available in a small SOT-25 package, which is compact and suitable for space-constrained applications.

Please note that the answers provided here are general and may vary depending on the specific datasheet and application requirements.