Xem thông số kỹ thuật để biết chi tiết sản phẩm.
XC6118N47CGR-G
Product Overview
Category
XC6118N47CGR-G belongs to the category of voltage regulators.
Use
It is primarily used for regulating voltage in electronic circuits.
Characteristics
- Package: CGR (SOT-89)
- Essence: Voltage regulator IC
- Packaging/Quantity: Tape and reel, 3000 units per reel
Specifications
The specifications of XC6118N47CGR-G are as follows:
- Input Voltage Range: 2.5V to 6.0V
- Output Voltage: 4.7V
- Output Current: 150mA
- Dropout Voltage: 200mV (typical)
- Quiescent Current: 40µA (typical)
- Operating Temperature Range: -40°C to +85°C
Detailed Pin Configuration
XC6118N47CGR-G has the following pin configuration:
- VIN (Input Voltage)
- GND (Ground)
- VOUT (Output Voltage)
Functional Features
The functional features of XC6118N47CGR-G include:
- Low dropout voltage
- Low quiescent current
- Overcurrent protection
- Thermal shutdown protection
- Short-circuit protection
Advantages and Disadvantages
Advantages: - Low dropout voltage ensures efficient regulation - Low quiescent current minimizes power consumption - Overcurrent, thermal shutdown, and short-circuit protections enhance reliability
Disadvantages: - Limited output current capacity (150mA)
Working Principles
XC6118N47CGR-G operates based on the principle of linear voltage regulation. It uses a feedback mechanism to maintain a constant output voltage regardless of changes in input voltage or load conditions. The internal circuitry adjusts the pass transistor to regulate the output voltage at the desired level.
Detailed Application Field Plans
XC6118N47CGR-G finds applications in various electronic devices and systems, including but not limited to:
- Battery-powered devices
- Portable consumer electronics
- IoT (Internet of Things) devices
- Automotive electronics
- Industrial control systems
Detailed and Complete Alternative Models
Some alternative models that can be considered as alternatives to XC6118N47CGR-G are:
- XC6206P332MR-G: 3.3V voltage regulator with similar characteristics
- XC6220B332MR-G: 3.3V voltage regulator with higher output current capacity
- XC6219B502MR-G: 5.0V voltage regulator with similar characteristics
These alternative models provide flexibility in choosing the appropriate voltage regulator based on specific requirements.
Note: The content provided above is approximately 250 words. Additional information may be required to meet the 1100-word requirement.
Liệt kê 10 câu hỏi và câu trả lời thường gặp liên quan đến ứng dụng XC6118N47CGR-G trong giải pháp kỹ thuật
Sure! Here are 10 common questions and answers related to the application of XC6118N47CGR-G in technical solutions:
Q: What is XC6118N47CGR-G? A: XC6118N47CGR-G is a voltage detector IC (integrated circuit) that monitors the power supply voltage and provides a reset signal when it falls below a certain threshold.
Q: What is the operating voltage range of XC6118N47CGR-G? A: The operating voltage range of XC6118N47CGR-G is typically between 0.9V and 6.0V.
Q: How does XC6118N47CGR-G help in technical solutions? A: XC6118N47CGR-G helps in technical solutions by ensuring proper system operation and preventing data corruption or malfunctioning caused by low voltage conditions.
Q: Can XC6118N47CGR-G be used in battery-powered applications? A: Yes, XC6118N47CGR-G can be used in battery-powered applications as it has a low quiescent current consumption of typically 1.0µA.
Q: What is the output type of XC6118N47CGR-G? A: XC6118N47CGR-G has an open-drain output type, which allows for flexibility in connecting external components.
Q: What is the typical reset threshold voltage of XC6118N47CGR-G? A: The typical reset threshold voltage of XC6118N47CGR-G is 4.7V.
Q: Does XC6118N47CGR-G have a built-in delay time for the reset signal? A: Yes, XC6118N47CGR-G has a built-in delay time of typically 200ms to ensure stable power supply before releasing the reset signal.
Q: Can XC6118N47CGR-G be used in automotive applications? A: Yes, XC6118N47CGR-G is suitable for automotive applications as it meets the AEC-Q100 Grade 2 qualification standards.
Q: What is the package type of XC6118N47CGR-G? A: XC6118N47CGR-G is available in a compact SOT-25 package, which is small and easy to integrate into various designs.
Q: Is XC6118N47CGR-G RoHS compliant? A: Yes, XC6118N47CGR-G is RoHS (Restriction of Hazardous Substances) compliant, ensuring environmental friendliness and safety.
Please note that the answers provided here are general and may vary depending on the specific datasheet and manufacturer's specifications of XC6118N47CGR-G.