Xem thông số kỹ thuật để biết chi tiết sản phẩm.
XC6118N49AGR-G
Product Overview
Category
XC6118N49AGR-G belongs to the category of voltage regulators.
Use
It is commonly used in electronic circuits to regulate and stabilize the output voltage.
Characteristics
- Voltage regulation
- Stabilization of output voltage
- Compact size
- Low power consumption
Package
XC6118N49AGR-G comes in a small surface-mount package.
Essence
The essence of XC6118N49AGR-G lies in its ability to provide stable and regulated voltage output for various electronic devices.
Packaging/Quantity
XC6118N49AGR-G is typically packaged in reels or tubes, with a quantity of 3000 units per reel/tube.
Specifications
- Input Voltage Range: 2.5V - 6.0V
- Output Voltage: 4.9V
- Output Current: 150mA
- Dropout Voltage: 200mV (typical)
- Quiescent Current: 40µA (typical)
- Operating Temperature Range: -40°C to +85°C
Detailed Pin Configuration
XC6118N49AGR-G has the following pin configuration:
- VIN: Input voltage pin
- GND: Ground pin
- VOUT: Output voltage pin
Functional Features
- Voltage regulation: XC6118N49AGR-G ensures a stable output voltage regardless of input voltage fluctuations.
- Overcurrent protection: It incorporates overcurrent protection to prevent damage to connected devices.
- Thermal shutdown: In case of excessive temperature, the regulator shuts down to avoid overheating.
Advantages and Disadvantages
Advantages
- Small form factor allows for easy integration into compact designs.
- Low power consumption helps conserve energy.
- Provides stable output voltage even under varying load conditions.
Disadvantages
- Limited output current capacity may not be suitable for high-power applications.
- Dropout voltage of 200mV may affect efficiency in low input voltage scenarios.
Working Principles
XC6118N49AGR-G operates on the principle of feedback control. It compares the output voltage with a reference voltage and adjusts the internal circuitry to maintain a constant output voltage.
Detailed Application Field Plans
XC6118N49AGR-G finds applications in various electronic devices, including but not limited to: - Mobile phones - Portable media players - Digital cameras - Wireless communication modules
Detailed and Complete Alternative Models
Some alternative models that can be considered as alternatives to XC6118N49AGR-G are: - LM317T - LT1086 - LM7805 - LM1117
These models offer similar functionality and can be used as substitutes depending on specific requirements.
Word count: 314 words
Liệt kê 10 câu hỏi và câu trả lời thường gặp liên quan đến ứng dụng XC6118N49AGR-G trong giải pháp kỹ thuật
Sure! Here are 10 common questions and answers related to the application of XC6118N49AGR-G in technical solutions:
Q: What is XC6118N49AGR-G? A: XC6118N49AGR-G is a voltage detector IC (integrated circuit) that monitors the power supply voltage and provides a reset signal when the voltage drops below a certain threshold.
Q: What is the operating voltage range of XC6118N49AGR-G? A: The operating voltage range of XC6118N49AGR-G is typically between 0.9V and 6.0V.
Q: How does XC6118N49AGR-G help in technical solutions? A: XC6118N49AGR-G helps in technical solutions by providing a reliable reset signal to microcontrollers, microprocessors, or other digital circuits when the power supply voltage falls below a specified level.
Q: What is the typical reset voltage threshold of XC6118N49AGR-G? A: The typical reset voltage threshold of XC6118N49AGR-G is 4.9V.
Q: Can XC6118N49AGR-G be used in battery-powered applications? A: Yes, XC6118N49AGR-G can be used in battery-powered applications as it operates within a wide voltage range and consumes very low quiescent current.
Q: Is XC6118N49AGR-G suitable for automotive applications? A: Yes, XC6118N49AGR-G is suitable for automotive applications as it meets the necessary quality and reliability standards required for automotive electronics.
Q: Does XC6118N49AGR-G have any built-in delay function? A: No, XC6118N49AGR-G does not have a built-in delay function. It provides an immediate reset signal when the voltage drops below the threshold.
Q: Can XC6118N49AGR-G be used in high-temperature environments? A: Yes, XC6118N49AGR-G is designed to operate in a wide temperature range, typically from -40°C to +105°C, making it suitable for high-temperature environments.
Q: What is the package type of XC6118N49AGR-G? A: XC6118N49AGR-G is available in a SOT-25 package, which is a small surface-mount package with 5 pins.
Q: Are there any application notes or reference designs available for XC6118N49AGR-G? A: Yes, the manufacturer of XC6118N49AGR-G provides application notes and reference designs that can help in understanding its usage and integration into various technical solutions.
Please note that the answers provided here are general and may vary depending on the specific requirements and datasheet of XC6118N49AGR-G.