XC6119N08ANR-G belongs to the category of integrated circuits (ICs).
It is commonly used as a voltage detector in electronic devices.
XC6119N08ANR-G is available in a small surface mount package.
The essence of XC6119N08ANR-G lies in its ability to accurately detect and monitor voltage levels in electronic circuits.
The product is typically packaged in reels or tubes, with a quantity of 3000 units per reel.
XC6119N08ANR-G has the following pin configuration:
XC6119N08ANR-G works by comparing the input voltage with a reference voltage. When the input voltage exceeds the detection threshold, the output pin is pulled low, indicating a detected voltage level.
XC6119N08ANR-G finds applications in various electronic devices and systems, including but not limited to: - Battery-powered devices - Power management circuits - Consumer electronics - Industrial control systems
Some alternative models that can be considered as alternatives to XC6119N08ANR-G are: - XC6120N08ANR-G - XC6118N08ANR-G - XC6117N08ANR-G - XC6116N08ANR-G
These models offer similar functionality and characteristics, providing flexibility in design choices.
Word count: 334 words
Sure! Here are 10 common questions and answers related to the application of XC6119N08ANR-G in technical solutions:
Q: What is XC6119N08ANR-G? A: XC6119N08ANR-G is a voltage detector IC (integrated circuit) that monitors the power supply voltage and provides an output signal when it falls below a certain threshold.
Q: What is the operating voltage range of XC6119N08ANR-G? A: The operating voltage range of XC6119N08ANR-G is typically between 0.8V and 6.0V.
Q: How does XC6119N08ANR-G help in technical solutions? A: XC6119N08ANR-G can be used to monitor the power supply voltage in various electronic devices and systems, providing a reliable way to detect undervoltage conditions.
Q: Can XC6119N08ANR-G be used in battery-powered applications? A: Yes, XC6119N08ANR-G can be used in battery-powered applications as it operates within a wide voltage range and consumes very low quiescent current.
Q: What is the output configuration of XC6119N08ANR-G? A: XC6119N08ANR-G has an open-drain output configuration, which means it requires an external pull-up resistor to provide a logic-level output signal.
Q: What is the typical accuracy of XC6119N08ANR-G? A: The typical accuracy of XC6119N08ANR-G is ±1.5% at room temperature.
Q: Can XC6119N08ANR-G be used for overvoltage detection? A: No, XC6119N08ANR-G is specifically designed for undervoltage detection and does not provide overvoltage detection functionality.
Q: What is the typical response time of XC6119N08ANR-G? A: The typical response time of XC6119N08ANR-G is around 200µs, making it suitable for fast detection of undervoltage conditions.
Q: Can XC6119N08ANR-G be used in automotive applications? A: Yes, XC6119N08ANR-G is AEC-Q100 qualified and can be used in automotive applications that require undervoltage monitoring.
Q: Are there any specific precautions to consider when using XC6119N08ANR-G? A: It is important to ensure proper decoupling and filtering of the power supply to minimize noise interference. Additionally, the recommended operating conditions and application circuit provided in the datasheet should be followed for optimal performance.
Please note that the answers provided here are general and may vary depending on the specific requirements and use cases. It is always recommended to refer to the datasheet and consult with the manufacturer for detailed information.