Xem thông số kỹ thuật để biết chi tiết sản phẩm.
XC6121A225MG-G
Product Overview
Category
XC6121A225MG-G belongs to the category of voltage regulators.
Use
It is primarily used for regulating voltage in electronic circuits.
Characteristics
- Voltage regulation capability
- Compact size
- Low power consumption
- High efficiency
Package
XC6121A225MG-G comes in a small surface-mount package.
Essence
The essence of XC6121A225MG-G lies in its ability to provide stable and regulated voltage output.
Packaging/Quantity
The product is typically packaged in reels or tubes, with a quantity of 3000 units per reel.
Specifications
- Input Voltage Range: 2.5V - 6.0V
- Output Voltage: 2.25V
- Output Current: 150mA
- Dropout Voltage: 200mV (typical)
- Quiescent Current: 30µA (typical)
- Operating Temperature Range: -40°C to +85°C
Detailed Pin Configuration
XC6121A225MG-G has the following pin configuration:
- VIN: Input voltage pin
- GND: Ground pin
- VOUT: Output voltage pin
Functional Features
- Voltage regulation: XC6121A225MG-G ensures a stable output voltage regardless of input voltage fluctuations.
- Overcurrent protection: The device incorporates overcurrent protection to prevent damage to the circuitry.
- Thermal shutdown: In case of excessive temperature, the regulator shuts down to avoid overheating.
Advantages and Disadvantages
Advantages
- Small form factor allows for easy integration into compact designs.
- Low power consumption helps conserve energy.
- High efficiency results in minimal power loss during voltage regulation.
Disadvantages
- Limited output current may not be suitable for high-power applications.
- Narrow input voltage range restricts compatibility with certain systems.
Working Principles
XC6121A225MG-G operates based on the principle of feedback control. It compares the output voltage to a reference voltage and adjusts the internal circuitry to maintain a constant output voltage, compensating for any variations in the input voltage.
Detailed Application Field Plans
XC6121A225MG-G finds applications in various electronic devices, including but not limited to: - Mobile phones - Portable media players - Digital cameras - Wearable devices - IoT devices
Detailed and Complete Alternative Models
Some alternative models that offer similar functionality to XC6121A225MG-G are: - XC6121B225MR-G - XC6121C225MR-G - XC6121D225MR-G - XC6121E225MR-G
These models have slightly different specifications and may be suitable for specific application requirements.
Word count: 345 words
Liệt kê 10 câu hỏi và câu trả lời thường gặp liên quan đến ứng dụng XC6121A225MG-G trong giải pháp kỹ thuật
Sure! Here are 10 common questions and answers related to the application of XC6121A225MG-G in technical solutions:
1. What is XC6121A225MG-G? - XC6121A225MG-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is designed to monitor the voltage level of a power supply and provide an output signal when the voltage falls below a certain threshold.
2. What is the operating voltage range of XC6121A225MG-G? - The operating voltage range of XC6121A225MG-G is from 0.8V to 6.0V.
3. How does XC6121A225MG-G work? - XC6121A225MG-G works by comparing the input voltage with a reference voltage internally set within the IC. When the input voltage drops below the reference voltage, it triggers the output signal.
4. What is the output type of XC6121A225MG-G? - XC6121A225MG-G has an open-drain output type, which means it can sink current but cannot source current.
5. What is the typical quiescent current of XC6121A225MG-G? - The typical quiescent current of XC6121A225MG-G is around 1.0µA.
6. Can XC6121A225MG-G be used for undervoltage detection? - Yes, XC6121A225MG-G is commonly used for undervoltage detection. It can detect when the voltage falls below a specific threshold and trigger an action accordingly.
7. Is XC6121A225MG-G suitable for battery-powered applications? - Yes, XC6121A225MG-G is suitable for battery-powered applications due to its low quiescent current and wide operating voltage range.
8. What is the accuracy of XC6121A225MG-G? - The accuracy of XC6121A225MG-G is typically ±2%.
9. Can XC6121A225MG-G be used in automotive applications? - Yes, XC6121A225MG-G is suitable for automotive applications as it can operate within the required voltage range and has a wide temperature range.
10. Are there any additional features of XC6121A225MG-G? - XC6121A225MG-G includes a built-in delay circuit to prevent false triggering due to voltage fluctuations or noise. It also has an enable pin to control the operation of the IC.
Please note that the answers provided here are general and may vary depending on specific application requirements.