Hình ảnh có thể mang tính chất minh họa.
Xem thông số kỹ thuật để biết chi tiết sản phẩm.
XC6121A348MR-G

XC6121A348MR-G

Product Overview

Category

XC6121A348MR-G belongs to the category of voltage regulators.

Use

It is primarily used for regulating voltage in electronic circuits.

Characteristics

  • Voltage regulation capability
  • Compact size
  • Low power consumption
  • High efficiency

Package

XC6121A348MR-G comes in a small surface-mount package.

Essence

The essence of XC6121A348MR-G lies in its ability to provide stable and regulated voltage to electronic devices.

Packaging/Quantity

XC6121A348MR-G is typically packaged in reels and is available in large quantities.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage: 3.3V
  • Output Current: 150mA
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 30µA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6121A348MR-G has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. VOUT: Output voltage pin
  4. EN: Enable pin (optional)

Functional Features

  • Voltage regulation: XC6121A348MR-G ensures a stable output voltage regardless of input voltage fluctuations.
  • Overcurrent protection: It incorporates overcurrent protection to safeguard connected devices.
  • Thermal shutdown: In case of excessive temperature, the regulator shuts down to prevent damage.
  • Low quiescent current: The low quiescent current ensures minimal power consumption when the device is idle.

Advantages and Disadvantages

Advantages

  • Compact size allows for easy integration into space-constrained designs.
  • High efficiency results in minimal power loss during voltage regulation.
  • Wide operating temperature range makes it suitable for various environments.

Disadvantages

  • Limited output current may not be sufficient for power-hungry applications.
  • Dropout voltage of 200mV may affect performance in low voltage scenarios.

Working Principles

XC6121A348MR-G operates based on the principle of feedback control. It compares the output voltage with a reference voltage and adjusts the internal circuitry to maintain a stable output voltage.

Detailed Application Field Plans

XC6121A348MR-G finds applications in various electronic devices, including but not limited to: - Mobile phones - Portable media players - Digital cameras - Wearable devices - IoT devices

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6121A348MR-G are: - XC6206P332MR: Similar voltage regulator with a slightly lower output current capability. - LM1117MPX-3.3/NOPB: Voltage regulator with higher output current capacity.

Note: The above list is not exhaustive and other alternative models may exist.

In conclusion, XC6121A348MR-G is a compact and efficient voltage regulator that provides stable voltage regulation for various electronic devices. Its small size, low power consumption, and wide operating temperature range make it suitable for a range of applications. However, its limited output current and dropout voltage should be considered when selecting the appropriate voltage regulator for specific requirements.

Liệt kê 10 câu hỏi và câu trả lời thường gặp liên quan đến ứng dụng XC6121A348MR-G trong giải pháp kỹ thuật

Sure! Here are 10 common questions and answers related to the application of XC6121A348MR-G in technical solutions:

  1. Question: What is XC6121A348MR-G?
    Answer: XC6121A348MR-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is used to monitor the voltage level in electronic circuits.

  2. Question: What is the operating voltage range of XC6121A348MR-G?
    Answer: The operating voltage range of XC6121A348MR-G is from 0.8V to 6.0V.

  3. Question: How does XC6121A348MR-G work?
    Answer: XC6121A348MR-G continuously monitors the input voltage and compares it with a reference voltage. If the input voltage falls below the reference voltage, it triggers an output signal.

  4. Question: What is the output type of XC6121A348MR-G?
    Answer: XC6121A348MR-G has an open-drain output type, which means it can sink current but cannot source current.

  5. Question: What is the typical quiescent current consumption of XC6121A348MR-G?
    Answer: The typical quiescent current consumption of XC6121A348MR-G is 1.0µA.

  6. Question: Can XC6121A348MR-G be used for overvoltage protection?
    Answer: No, XC6121A348MR-G is specifically designed for undervoltage detection. It does not provide overvoltage protection.

  7. Question: What is the accuracy of the voltage detection threshold in XC6121A348MR-G?
    Answer: The accuracy of the voltage detection threshold in XC6121A348MR-G is ±1.5%.

  8. Question: Can XC6121A348MR-G be used in automotive applications?
    Answer: Yes, XC6121A348MR-G is AEC-Q100 qualified and suitable for automotive applications.

  9. Question: What is the temperature range of XC6121A348MR-G?
    Answer: The temperature range of XC6121A348MR-G is from -40°C to +85°C.

  10. Question: Is XC6121A348MR-G available in a surface-mount package?
    Answer: Yes, XC6121A348MR-G is available in a compact SOT-25 package, which is suitable for surface-mount applications.

Please note that these answers are based on general information about XC6121A348MR-G and may vary depending on specific application requirements.