Torex Semiconductor Ltd
Hình ảnh có thể mang tính chất minh họa.
Xem thông số kỹ thuật để biết chi tiết sản phẩm.
XC6122C739MR-G
Xem chi tiết DataSheets

XC6122C739MR-G

Product Overview

Category

XC6122C739MR-G belongs to the category of voltage regulators.

Use

It is commonly used in electronic circuits to regulate and stabilize voltage levels.

Characteristics

  • Voltage regulation
  • Stabilization of voltage levels
  • Compact size
  • Low power consumption

Package

XC6122C739MR-G comes in a small surface-mount package.

Essence

The essence of XC6122C739MR-G is to provide a stable and regulated voltage output for electronic devices.

Packaging/Quantity

XC6122C739MR-G is typically packaged in reels or tubes, with a quantity of 3000 units per reel/tube.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage Range: 1.2V - 5.5V
  • Maximum Output Current: 200mA
  • Dropout Voltage: 150mV (typical)
  • Quiescent Current: 30μA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6122C739MR-G has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. VOUT: Output voltage pin
  4. CE: Chip enable pin

Functional Features

  • Low dropout voltage
  • Low quiescent current
  • Overcurrent protection
  • Thermal shutdown protection
  • Short-circuit protection

Advantages

  • Small form factor
  • Wide input voltage range
  • Stable and regulated output voltage
  • Low power consumption
  • Built-in protection features

Disadvantages

  • Limited maximum output current (200mA)
  • Not suitable for high-power applications

Working Principles

XC6122C739MR-G operates by comparing the output voltage with a reference voltage. It adjusts the internal resistance to maintain a stable output voltage, compensating for changes in input voltage and load conditions.

Detailed Application Field Plans

XC6122C739MR-G is widely used in various electronic devices, including:

  1. Mobile phones
  2. Portable media players
  3. Digital cameras
  4. Wearable devices
  5. IoT devices

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6122C739MR-G are:

  1. LM1117-3.3: A 3.3V voltage regulator with similar specifications.
  2. MCP1700-3302E: Another 3.3V voltage regulator with low dropout voltage.
  3. AMS1117-5.0: A 5.0V voltage regulator suitable for higher voltage applications.

These alternative models provide similar functionality and can be used as substitutes depending on specific requirements.

Word count: 314 words

Liệt kê 10 câu hỏi và câu trả lời thường gặp liên quan đến ứng dụng XC6122C739MR-G trong giải pháp kỹ thuật

Sure! Here are 10 common questions and answers related to the application of XC6122C739MR-G in technical solutions:

  1. Question: What is XC6122C739MR-G?
    - Answer: XC6122C739MR-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is used to monitor the voltage level in electronic circuits.

  2. Question: What is the operating voltage range of XC6122C739MR-G?
    - Answer: The operating voltage range of XC6122C739MR-G is from 0.7V to 6.0V.

  3. Question: How does XC6122C739MR-G work?
    - Answer: XC6122C739MR-G continuously monitors the input voltage and compares it with a reference voltage. When the input voltage falls below a certain threshold, it triggers an output signal.

  4. Question: What is the output type of XC6122C739MR-G?
    - Answer: XC6122C739MR-G has an open-drain output type, which means it can be connected to other devices or circuits for further processing.

  5. Question: What is the typical quiescent current consumption of XC6122C739MR-G?
    - Answer: The typical quiescent current consumption of XC6122C739MR-G is very low, usually around 1.0µA.

  6. Question: Can XC6122C739MR-G be used in battery-powered applications?
    - Answer: Yes, XC6122C739MR-G is suitable for battery-powered applications due to its low quiescent current consumption.

  7. Question: What is the accuracy of the voltage detection in XC6122C739MR-G?
    - Answer: The accuracy of voltage detection in XC6122C739MR-G is typically ±1.5%.

  8. Question: Can XC6122C739MR-G be used for overvoltage protection?
    - Answer: No, XC6122C739MR-G is primarily designed for undervoltage detection and does not provide overvoltage protection.

  9. Question: What is the temperature range of XC6122C739MR-G?
    - Answer: The temperature range of XC6122C739MR-G is from -40°C to +85°C.

  10. Question: How is XC6122C739MR-G typically packaged?
    - Answer: XC6122C739MR-G is commonly available in a small SOT-25 package, which is suitable for surface-mount applications.

Please note that these answers are general and may vary depending on the specific datasheet and application requirements.