Xem thông số kỹ thuật để biết chi tiết sản phẩm.
XC6122D439ER-G
Product Overview
Category
XC6122D439ER-G belongs to the category of voltage regulators.
Use
It is primarily used for regulating voltage in electronic circuits.
Characteristics
- Compact size
- High efficiency
- Low dropout voltage
- Wide input voltage range
- Overcurrent protection
- Thermal shutdown protection
Package
XC6122D439ER-G comes in a small surface-mount package.
Essence
The essence of XC6122D439ER-G lies in its ability to provide stable and regulated voltage to electronic devices.
Packaging/Quantity
It is typically packaged in reels or tape and reel packaging, with a quantity of 3000 units per reel.
Specifications
- Input Voltage Range: 2.5V - 6.0V
- Output Voltage: 3.3V
- Output Current: 150mA
- Dropout Voltage: 200mV (typical)
- Quiescent Current: 30µA (typical)
- Operating Temperature Range: -40°C to +85°C
Detailed Pin Configuration
XC6122D439ER-G has the following pin configuration:
- VIN (Input Voltage)
- GND (Ground)
- VOUT (Output Voltage)
Functional Features
- Voltage regulation
- Overcurrent protection
- Thermal shutdown protection
Advantages
- Small form factor
- High efficiency
- Wide input voltage range
- Overcurrent and thermal protection ensure device safety
Disadvantages
- Limited output current capacity
- Not suitable for high-power applications
Working Principles
XC6122D439ER-G operates by comparing the output voltage with a reference voltage. It adjusts the resistance to maintain a constant output voltage, compensating for changes in input voltage and load conditions.
Detailed Application Field Plans
XC6122D439ER-G finds applications in various electronic devices, including but not limited to: - Mobile phones - Portable media players - Digital cameras - Wireless communication devices - IoT devices
Detailed and Complete Alternative Models
Some alternative models that can be considered as alternatives to XC6122D439ER-G are: - LM1117-3.3 - MCP1700-3302E/TO - TS2937CP-3.3
These models offer similar voltage regulation capabilities and can be used as substitutes depending on specific requirements.
In conclusion, XC6122D439ER-G is a compact voltage regulator with high efficiency and a wide input voltage range. It provides stable voltage output for various electronic devices, ensuring their proper functioning. While it has limitations in terms of output current capacity, it offers overcurrent and thermal protection for device safety. Its small form factor makes it suitable for space-constrained applications.
Liệt kê 10 câu hỏi và câu trả lời thường gặp liên quan đến ứng dụng XC6122D439ER-G trong giải pháp kỹ thuật
Sure! Here are 10 common questions and answers related to the application of XC6122D439ER-G in technical solutions:
Q: What is XC6122D439ER-G? A: XC6122D439ER-G is a voltage detector IC manufactured by Torex Semiconductor. It is used to monitor the voltage level of a power supply and provide an output signal when the voltage falls below a certain threshold.
Q: What is the operating voltage range of XC6122D439ER-G? A: The operating voltage range of XC6122D439ER-G is typically between 0.8V and 6.0V.
Q: How does XC6122D439ER-G work? A: XC6122D439ER-G works by comparing the input voltage with a reference voltage. When the input voltage drops below the reference voltage, it triggers an internal circuit that generates an output signal.
Q: What is the output type of XC6122D439ER-G? A: XC6122D439ER-G has an open-drain output type, which means it can be connected to other devices through a pull-up resistor to achieve different logic levels.
Q: What is the typical quiescent current consumption of XC6122D439ER-G? A: The typical quiescent current consumption of XC6122D439ER-G is around 1.0µA, making it suitable for low-power applications.
Q: Can XC6122D439ER-G be used for overvoltage detection? A: No, XC6122D439ER-G is specifically designed for undervoltage detection. For overvoltage detection, a different voltage detector IC should be used.
Q: What is the accuracy of the voltage detection threshold in XC6122D439ER-G? A: The accuracy of the voltage detection threshold in XC6122D439ER-G is typically ±1.5%.
Q: Can XC6122D439ER-G be used in automotive applications? A: Yes, XC6122D439ER-G is AEC-Q100 qualified and can be used in automotive applications.
Q: What is the temperature range for operation of XC6122D439ER-G? A: XC6122D439ER-G has an operating temperature range of -40°C to +85°C.
Q: Is XC6122D439ER-G available in different package options? A: Yes, XC6122D439ER-G is available in a SOT-23-5 package, which is a small surface-mount package commonly used in electronic devices.
Please note that the answers provided here are general and may vary depending on the specific datasheet and application requirements.