Torex Semiconductor Ltd
Hình ảnh có thể mang tính chất minh họa.
Xem thông số kỹ thuật để biết chi tiết sản phẩm.
XC6122E516MR-G
Xem chi tiết DataSheets

XC6122E516MR-G

Product Overview

Category

XC6122E516MR-G belongs to the category of voltage regulators.

Use

It is primarily used for regulating voltage in electronic circuits.

Characteristics

  • Voltage regulation capability
  • Compact size
  • Low power consumption
  • High efficiency

Package

XC6122E516MR-G comes in a small surface-mount package.

Essence

The essence of XC6122E516MR-G lies in its ability to provide stable and regulated voltage output.

Packaging/Quantity

It is typically packaged in reels or tape and reel packaging, with a quantity of 3000 units per reel.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage Range: 1.2V - 5.5V
  • Maximum Output Current: 200mA
  • Dropout Voltage: 150mV (at 100mA)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6122E516MR-G has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. VOUT: Output voltage pin
  4. CE: Chip enable pin

Functional Features

  • Low quiescent current
  • Overcurrent protection
  • Thermal shutdown protection
  • Short-circuit protection

Advantages and Disadvantages

Advantages

  • Small form factor
  • Wide input voltage range
  • Excellent voltage regulation
  • Built-in protection features

Disadvantages

  • Limited maximum output current
  • Relatively high dropout voltage

Working Principles

XC6122E516MR-G operates by comparing the output voltage with a reference voltage and adjusting the internal circuitry to maintain a stable output voltage. It utilizes a feedback mechanism to continuously monitor and regulate the output voltage.

Detailed Application Field Plans

XC6122E516MR-G finds applications in various electronic devices and circuits, including but not limited to: - Mobile phones - Portable media players - Digital cameras - Wearable devices - IoT devices

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6122E516MR-G are: - XC6206P332MR - LM1117IMPX-3.3/NOPB - MCP1700T-3302E/TT

These models offer similar voltage regulation capabilities and can be used as substitutes depending on specific requirements.

Word count: 305 words

Liệt kê 10 câu hỏi và câu trả lời thường gặp liên quan đến ứng dụng XC6122E516MR-G trong giải pháp kỹ thuật

Sure! Here are 10 common questions and answers related to the application of XC6122E516MR-G in technical solutions:

  1. Question: What is XC6122E516MR-G?
    - Answer: XC6122E516MR-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is commonly used for monitoring power supply voltages in various electronic devices.

  2. Question: What is the operating voltage range of XC6122E516MR-G?
    - Answer: The operating voltage range of XC6122E516MR-G is typically between 0.8V and 6.0V.

  3. Question: How does XC6122E516MR-G detect voltage levels?
    - Answer: XC6122E516MR-G uses an internal voltage reference to compare the input voltage with a preset threshold. When the input voltage crosses the threshold, it triggers an output signal.

  4. Question: What is the output configuration of XC6122E516MR-G?
    - Answer: XC6122E516MR-G has an open-drain output configuration, which means it can be connected to other devices through a pull-up resistor.

  5. Question: Can XC6122E516MR-G be used for both overvoltage and undervoltage detection?
    - Answer: Yes, XC6122E516MR-G can be configured for both overvoltage and undervoltage detection by setting the appropriate threshold voltage.

  6. Question: What is the typical quiescent current consumption of XC6122E516MR-G?
    - Answer: The typical quiescent current consumption of XC6122E516MR-G is very low, usually around 1.0µA.

  7. Question: Is XC6122E516MR-G suitable for battery-powered applications?
    - Answer: Yes, XC6122E516MR-G is suitable for battery-powered applications due to its low quiescent current consumption and wide operating voltage range.

  8. Question: Can XC6122E516MR-G be used in automotive applications?
    - Answer: Yes, XC6122E516MR-G is AEC-Q100 qualified, making it suitable for automotive applications that require high reliability and performance.

  9. Question: Does XC6122E516MR-G have any built-in protection features?
    - Answer: Yes, XC6122E516MR-G has built-in hysteresis and a delay circuit to prevent false triggering and ensure stable operation.

  10. Question: What package does XC6122E516MR-G come in?
    - Answer: XC6122E516MR-G is available in a SOT-25 package, which is a small surface-mount package with 5 pins.

Please note that the answers provided here are general and may vary depending on the specific application and requirements. It is always recommended to refer to the datasheet and consult with the manufacturer for detailed information.