Xem thông số kỹ thuật để biết chi tiết sản phẩm.
XC6123A448MR-G
Product Overview
Category
XC6123A448MR-G belongs to the category of voltage regulators.
Use
It is primarily used for regulating voltage in electronic circuits.
Characteristics
- Compact size
- High efficiency
- Low dropout voltage
- Wide input voltage range
- Overcurrent protection
- Thermal shutdown protection
Package
XC6123A448MR-G is available in a small SOT-23-5 package.
Essence
The essence of XC6123A448MR-G lies in its ability to provide stable and regulated voltage output for various electronic devices.
Packaging/Quantity
It is typically packaged in reels, with 3000 units per reel.
Specifications
- Input Voltage Range: 2.5V - 6.0V
- Output Voltage: 4.48V
- Output Current: Up to 150mA
- Dropout Voltage: 200mV (typical)
- Quiescent Current: 30µA (typical)
- Operating Temperature Range: -40°C to +85°C
Detailed Pin Configuration
XC6123A448MR-G has the following pin configuration:
- VIN (Input Voltage)
- GND (Ground)
- NC (No Connection)
- VOUT (Output Voltage)
- EN (Enable)
Functional Features
- Voltage Regulation: XC6123A448MR-G ensures a stable output voltage regardless of input voltage fluctuations.
- Overcurrent Protection: It incorporates overcurrent protection to safeguard connected devices.
- Thermal Shutdown Protection: In case of excessive heat, the regulator shuts down to prevent damage.
- Low Dropout Voltage: The low dropout voltage enables efficient power conversion even with low input voltages.
Advantages and Disadvantages
Advantages
- Small form factor allows for easy integration into compact designs.
- Wide input voltage range makes it suitable for various applications.
- High efficiency results in minimal power loss.
- Overcurrent and thermal shutdown protection enhance device reliability.
Disadvantages
- Limited output current may not be sufficient for high-power applications.
- The absence of adjustable output voltage restricts flexibility in certain scenarios.
Working Principles
XC6123A448MR-G operates based on the principle of linear voltage regulation. It uses a feedback mechanism to compare the output voltage with a reference voltage, adjusting the internal circuitry to maintain a constant output voltage despite changes in the input voltage.
Detailed Application Field Plans
XC6123A448MR-G finds application in various electronic devices, including but not limited to: - Mobile phones - Portable media players - Digital cameras - Wearable devices - IoT devices
Detailed and Complete Alternative Models
Some alternative models that can be considered as alternatives to XC6123A448MR-G are: - XC6123B448MR-G: Similar specifications with minor variations. - XC6123C448MR-G: Higher output current capability. - XC6123D448MR-G: Adjustable output voltage option.
These alternative models provide flexibility in choosing the most suitable voltage regulator for specific requirements.
Word count: 433 words
Liệt kê 10 câu hỏi và câu trả lời thường gặp liên quan đến ứng dụng XC6123A448MR-G trong giải pháp kỹ thuật
Sure! Here are 10 common questions and answers related to the application of XC6123A448MR-G in technical solutions:
Question: What is XC6123A448MR-G?
Answer: XC6123A448MR-G is a specific model of voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is designed to monitor the voltage level of a power supply and provide an output signal when the voltage falls below a certain threshold.Question: What is the operating voltage range of XC6123A448MR-G?
Answer: The operating voltage range of XC6123A448MR-G is typically between 0.8V and 6.0V.Question: How does XC6123A448MR-G work?
Answer: XC6123A448MR-G works by comparing the input voltage with a reference voltage. When the input voltage falls below the reference voltage, it triggers an internal circuit that generates an output signal.Question: What is the output signal of XC6123A448MR-G?
Answer: The output signal of XC6123A448MR-G is an open-drain output, which means it can be connected to other devices or circuits for further processing.Question: Can XC6123A448MR-G be used in battery-powered applications?
Answer: Yes, XC6123A448MR-G can be used in battery-powered applications as it has a low quiescent current consumption, making it suitable for power-sensitive designs.Question: What is the typical accuracy of XC6123A448MR-G?
Answer: The typical accuracy of XC6123A448MR-G is ±1.5% at room temperature.Question: Can XC6123A448MR-G be used in automotive applications?
Answer: Yes, XC6123A448MR-G is AEC-Q100 qualified, making it suitable for automotive applications where reliability and performance under harsh conditions are required.Question: What is the maximum operating temperature of XC6123A448MR-G?
Answer: The maximum operating temperature of XC6123A448MR-G is typically 125°C.Question: Can XC6123A448MR-G be used in industrial control systems?
Answer: Yes, XC6123A448MR-G can be used in industrial control systems as it has a wide operating voltage range and can tolerate voltage fluctuations.Question: Does XC6123A448MR-G have any built-in protection features?
Answer: Yes, XC6123A448MR-G has built-in overvoltage protection, reverse voltage protection, and thermal shutdown protection to ensure safe operation in various conditions.
Please note that these answers are based on general information about XC6123A448MR-G and may vary depending on specific application requirements. It is always recommended to refer to the datasheet and consult with the manufacturer for detailed technical specifications and guidelines.