Xem thông số kỹ thuật để biết chi tiết sản phẩm.
XC6123D630MR-G
Product Overview
Category
XC6123D630MR-G belongs to the category of voltage regulators.
Use
It is primarily used for regulating voltage in electronic circuits.
Characteristics
- Compact size
- High efficiency
- Low dropout voltage
- Wide input voltage range
- Overcurrent protection
- Thermal shutdown protection
Package
XC6123D630MR-G comes in a small surface-mount package.
Essence
The essence of XC6123D630MR-G lies in its ability to provide stable and regulated voltage to electronic devices.
Packaging/Quantity
It is typically packaged in reels and available in quantities of 3000 units per reel.
Specifications
- Input Voltage Range: 2.5V - 6.0V
- Output Voltage: 3.3V
- Output Current: 300mA
- Dropout Voltage: 200mV (typical)
- Quiescent Current: 40μA (typical)
- Operating Temperature Range: -40°C to +85°C
Detailed Pin Configuration
XC6123D630MR-G has the following pin configuration:
- VIN: Input voltage pin
- GND: Ground pin
- VOUT: Output voltage pin
Functional Features
- Voltage regulation: XC6123D630MR-G ensures a stable output voltage regardless of input voltage fluctuations.
- Overcurrent protection: It safeguards the circuit by limiting the current in case of excessive load.
- Thermal shutdown protection: The device automatically shuts down if the temperature exceeds a certain threshold, preventing damage due to overheating.
Advantages and Disadvantages
Advantages
- Small form factor allows for easy integration into compact designs.
- High efficiency results in minimal power loss.
- Wide input voltage range makes it compatible with various power sources.
- Overcurrent and thermal protection enhance the reliability of the circuit.
Disadvantages
- Limited output current may not be suitable for high-power applications.
- Dropout voltage may cause a slight decrease in efficiency.
Working Principles
XC6123D630MR-G operates based on the principle of feedback control. It compares the output voltage with a reference voltage and adjusts the internal circuitry to maintain a constant output voltage, compensating for input voltage variations.
Detailed Application Field Plans
XC6123D630MR-G finds applications in various electronic devices, including but not limited to: - Portable consumer electronics - IoT devices - Battery-powered devices - Wearable devices - Industrial automation systems
Detailed and Complete Alternative Models
Some alternative models that can be considered as alternatives to XC6123D630MR-G are: - XC6206P332MR-G - LM1117IMPX-3.3/NOPB - MCP1700T-3302E/TT
These models offer similar functionality and specifications, providing options for different design requirements.
In conclusion, XC6123D630MR-G is a compact voltage regulator with excellent characteristics, making it suitable for a wide range of applications. Its efficient operation, overcurrent protection, and thermal shutdown features contribute to its reliability. However, designers should consider alternative models depending on specific project requirements.
Liệt kê 10 câu hỏi và câu trả lời thường gặp liên quan đến ứng dụng XC6123D630MR-G trong giải pháp kỹ thuật
Sure! Here are 10 common questions and answers related to the application of XC6123D630MR-G in technical solutions:
Q: What is XC6123D630MR-G? A: XC6123D630MR-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is commonly used for monitoring power supply voltages in various electronic devices.
Q: What is the operating voltage range of XC6123D630MR-G? A: The operating voltage range of XC6123D630MR-G is from 0.6V to 6.0V.
Q: What is the output type of XC6123D630MR-G? A: XC6123D630MR-G has an open-drain output type, which means it can sink current but cannot source current.
Q: What is the typical quiescent current consumption of XC6123D630MR-G? A: The typical quiescent current consumption of XC6123D630MR-G is very low, typically around 1.0µA.
Q: Can XC6123D630MR-G be used for overvoltage detection? A: No, XC6123D630MR-G is specifically designed for undervoltage detection. It triggers an output signal when the monitored voltage falls below a certain threshold.
Q: What is the accuracy of the undervoltage detection threshold in XC6123D630MR-G? A: The accuracy of the undervoltage detection threshold in XC6123D630MR-G is typically ±1.5%.
Q: Does XC6123D630MR-G have built-in hysteresis? A: Yes, XC6123D630MR-G incorporates built-in hysteresis to prevent output oscillation near the threshold voltage.
Q: Can XC6123D630MR-G be used in automotive applications? A: Yes, XC6123D630MR-G is suitable for automotive applications as it meets the AEC-Q100 Grade 2 qualification standards.
Q: What is the package type of XC6123D630MR-G? A: XC6123D630MR-G is available in a small SOT-25 package, which is compact and easy to mount on PCBs.
Q: Is XC6123D630MR-G RoHS compliant? A: Yes, XC6123D630MR-G is RoHS (Restriction of Hazardous Substances) compliant, ensuring it meets environmental regulations.
Please note that the answers provided here are general and may vary depending on the specific datasheet and application requirements.