Xem thông số kỹ thuật để biết chi tiết sản phẩm.
XC6123D718MR-G
Product Overview
Category
XC6123D718MR-G belongs to the category of voltage regulators.
Use
It is commonly used for regulating voltage in electronic circuits.
Characteristics
- Compact size
- High efficiency
- Low dropout voltage
- Wide input voltage range
- Overcurrent protection
- Thermal shutdown protection
Package
XC6123D718MR-G is available in a small surface-mount package.
Essence
The essence of XC6123D718MR-G lies in its ability to regulate voltage with high efficiency and low dropout voltage.
Packaging/Quantity
XC6123D718MR-G is typically packaged in reels or tubes, with a quantity of 3000 units per reel/tube.
Specifications
- Input Voltage Range: 2.5V - 6.0V
- Output Voltage: 1.8V
- Output Current: 150mA
- Dropout Voltage: 200mV (typical)
- Quiescent Current: 40μA (typical)
- Operating Temperature Range: -40°C to +85°C
Detailed Pin Configuration
XC6123D718MR-G has the following pin configuration:
- VIN: Input voltage pin
- GND: Ground pin
- VOUT: Output voltage pin
- EN: Enable pin (optional)
Functional Features
- Voltage regulation: XC6123D718MR-G ensures a stable output voltage of 1.8V regardless of input voltage fluctuations.
- Overcurrent protection: It incorporates overcurrent protection to safeguard the circuit from excessive current flow.
- Thermal shutdown protection: In case of excessive temperature, the regulator shuts down to prevent damage.
Advantages and Disadvantages
Advantages
- Small form factor allows for space-saving designs.
- High efficiency results in minimal power loss.
- Wide input voltage range provides flexibility in various applications.
- Overcurrent and thermal shutdown protection enhance circuit reliability.
Disadvantages
- Limited output current capacity (150mA).
- Dropout voltage may affect performance in low input voltage scenarios.
Working Principles
XC6123D718MR-G operates based on the principle of a linear voltage regulator. It uses a feedback mechanism to maintain a constant output voltage, regardless of input voltage variations. The internal circuitry compares the output voltage with a reference voltage and adjusts the pass transistor accordingly to regulate the output voltage.
Detailed Application Field Plans
XC6123D718MR-G finds applications in various electronic devices, including but not limited to: - Mobile phones - Portable media players - Digital cameras - Wireless communication modules - Battery-powered devices
Detailed and Complete Alternative Models
Some alternative models that can be considered as alternatives to XC6123D718MR-G are: - XC6201 series - XC6202 series - XC6203 series - XC6204 series
These models offer similar voltage regulation capabilities with varying specifications and features.
In conclusion, XC6123D718MR-G is a compact and efficient voltage regulator suitable for a wide range of applications. Its high efficiency, small form factor, and built-in protection features make it an ideal choice for various electronic circuits.
Liệt kê 10 câu hỏi và câu trả lời thường gặp liên quan đến ứng dụng XC6123D718MR-G trong giải pháp kỹ thuật
Sure! Here are 10 common questions and answers related to the application of XC6123D718MR-G in technical solutions:
Question: What is XC6123D718MR-G?
- Answer: XC6123D718MR-G is a specific model of voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is designed to monitor the voltage level in electronic circuits and provide an output signal when the voltage exceeds or falls below a certain threshold.Question: What is the operating voltage range of XC6123D718MR-G?
- Answer: The operating voltage range of XC6123D718MR-G is typically between 0.8V and 6.0V.Question: How does XC6123D718MR-G work?
- Answer: XC6123D718MR-G works by comparing the input voltage with a reference voltage internally set within the IC. When the input voltage crosses the threshold, it triggers the output signal.Question: What is the output type of XC6123D718MR-G?
- Answer: XC6123D718MR-G has an open-drain output type, which means it can sink current but cannot source current. An external pull-up resistor is required to obtain a logic-level output.Question: What is the typical quiescent current consumption of XC6123D718MR-G?
- Answer: The typical quiescent current consumption of XC6123D718MR-G is very low, usually around 1.0µA.Question: Can XC6123D718MR-G be used for overvoltage protection?
- Answer: No, XC6123D718MR-G is not specifically designed for overvoltage protection. It is primarily used as a voltage monitoring device.Question: What is the typical response time of XC6123D718MR-G?
- Answer: The typical response time of XC6123D718MR-G is very fast, usually around 1µs.Question: Can XC6123D718MR-G be used in battery-powered applications?
- Answer: Yes, XC6123D718MR-G can be used in battery-powered applications as it has a low quiescent current consumption, making it suitable for power-sensitive designs.Question: Is XC6123D718MR-G suitable for automotive applications?
- Answer: Yes, XC6123D718MR-G is suitable for automotive applications as it can operate within the specified temperature range (-40°C to +105°C) and has a wide operating voltage range.Question: Can XC6123D718MR-G be used in conjunction with a microcontroller?
- Answer: Yes, XC6123D718MR-G can be easily integrated with a microcontroller by connecting its output pin to an input pin of the microcontroller. This allows the microcontroller to take appropriate actions based on the voltage level detected by XC6123D718MR-G.
Please note that the answers provided here are general and may vary depending on specific application requirements. It is always recommended to refer to the datasheet and consult with the manufacturer for detailed information and application-specific guidance.