Torex Semiconductor Ltd
Hình ảnh có thể mang tính chất minh họa.
Xem thông số kỹ thuật để biết chi tiết sản phẩm.
XC6123D748MR-G
Xem chi tiết DataSheets

XC6123D748MR-G

Product Overview

Category

XC6123D748MR-G belongs to the category of voltage regulators.

Use

It is primarily used for regulating voltage in electronic circuits.

Characteristics

  • High precision voltage regulation
  • Low dropout voltage
  • Low quiescent current
  • Thermal shutdown protection
  • Short circuit protection

Package

XC6123D748MR-G is available in a small surface mount package.

Essence

The essence of XC6123D748MR-G lies in its ability to provide stable and regulated voltage to electronic devices.

Packaging/Quantity

XC6123D748MR-G is typically packaged in reels or tape and reel packaging, with a quantity of 3000 units per reel.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage Range: 1.2V - 5.0V
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 30μA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6123D748MR-G has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. VOUT: Output voltage pin
  4. EN: Enable pin (optional)

Functional Features

  • High precision voltage regulation ensures stable output voltage.
  • Low dropout voltage allows efficient operation even with low input voltages.
  • Low quiescent current minimizes power consumption.
  • Thermal shutdown protection prevents overheating.
  • Short circuit protection safeguards against damage caused by excessive current.

Advantages and Disadvantages

Advantages

  • High precision voltage regulation
  • Low dropout voltage
  • Low quiescent current
  • Thermal and short circuit protection

Disadvantages

  • Limited input voltage range (2.5V - 6.0V)
  • Requires external enable pin for control (optional)

Working Principles

XC6123D748MR-G operates by comparing the output voltage with a reference voltage and adjusting the internal circuitry to maintain a stable output voltage. It uses a feedback mechanism to continuously monitor and regulate the output voltage.

Detailed Application Field Plans

XC6123D748MR-G finds applications in various electronic devices, including but not limited to: - Mobile phones - Tablets - Portable media players - Digital cameras - Wearable devices

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6123D748MR-G are: - XC6123D748NR-G - XC6123D748PR-G - XC6123D748SR-G

These models offer similar functionality and characteristics, providing options for different requirements and specifications.

(Note: The content provided above is approximately 300 words. Additional information can be added to meet the required word count of 1100 words.)

Liệt kê 10 câu hỏi và câu trả lời thường gặp liên quan đến ứng dụng XC6123D748MR-G trong giải pháp kỹ thuật

Sure! Here are 10 common questions and answers related to the application of XC6123D748MR-G in technical solutions:

  1. Question: What is XC6123D748MR-G?
    Answer: XC6123D748MR-G is a voltage detector IC (integrated circuit) that monitors the power supply voltage and provides a reset signal when the voltage drops below a certain threshold.

  2. Question: What is the operating voltage range of XC6123D748MR-G?
    Answer: The operating voltage range of XC6123D748MR-G is typically between 0.8V and 6.0V.

  3. Question: How does XC6123D748MR-G help in technical solutions?
    Answer: XC6123D748MR-G helps in technical solutions by providing a reliable reset signal to microcontrollers, microprocessors, or other digital devices when the power supply voltage falls below a specified level. This ensures proper system initialization and prevents data corruption.

  4. Question: What is the output type of XC6123D748MR-G?
    Answer: XC6123D748MR-G has an open-drain output type, which means it can be connected to other devices with a pull-up resistor to achieve the desired logic level.

  5. Question: What is the typical reset threshold voltage of XC6123D748MR-G?
    Answer: The typical reset threshold voltage of XC6123D748MR-G is 4.8V.

  6. Question: Can XC6123D748MR-G be used in battery-powered applications?
    Answer: Yes, XC6123D748MR-G can be used in battery-powered applications as it has a low quiescent current consumption of typically 1.0µA, making it suitable for power-sensitive designs.

  7. Question: Does XC6123D748MR-G have a built-in delay time for the reset signal?
    Answer: Yes, XC6123D748MR-G has a built-in delay time of typically 200ms to ensure stable power supply voltage before asserting the reset signal.

  8. Question: What is the temperature range in which XC6123D748MR-G operates?
    Answer: XC6123D748MR-G operates within a temperature range of -40°C to +85°C.

  9. Question: Can XC6123D748MR-G be used in automotive applications?
    Answer: Yes, XC6123D748MR-G is AEC-Q100 qualified and can be used in automotive applications where reliable voltage monitoring and reset functionality are required.

  10. Question: Is XC6123D748MR-G available in different package options?
    Answer: Yes, XC6123D748MR-G is available in various package options, including SOT-25 and USP-4B, providing flexibility for different PCB layouts and space constraints.

Please note that the answers provided here are general and may vary depending on the specific datasheet and application requirements.