Xem thông số kỹ thuật để biết chi tiết sản phẩm.
XC6124D316MR-G
Product Overview
Category
XC6124D316MR-G belongs to the category of voltage regulators.
Use
It is commonly used in electronic circuits to regulate and stabilize the voltage supplied to various components.
Characteristics
- Voltage regulation: XC6124D316MR-G provides a stable output voltage regardless of input voltage fluctuations.
- Low dropout voltage: It operates efficiently even when the input voltage is close to the desired output voltage.
- Low quiescent current: The regulator consumes minimal current when no load is connected.
- Thermal shutdown protection: It automatically shuts down to prevent damage due to excessive heat.
- Short-circuit protection: It safeguards against short-circuits, preventing damage to the regulator and connected components.
Package
XC6124D316MR-G comes in a small form factor package, making it suitable for space-constrained applications.
Essence
The essence of XC6124D316MR-G lies in its ability to provide stable and regulated voltage to electronic circuits.
Packaging/Quantity
It is typically available in reels or tubes, with varying quantities depending on the supplier.
Specifications
- Input voltage range: 2.5V - 6.0V
- Output voltage: 3.16V
- Maximum output current: 150mA
- Dropout voltage: 200mV (typical)
- Quiescent current: 30µA (typical)
- Operating temperature range: -40°C to +85°C
Detailed Pin Configuration
XC6124D316MR-G has the following pin configuration:
- VIN: Input voltage pin
- GND: Ground pin
- VOUT: Output voltage pin
Functional Features
- Voltage regulation: Maintains a constant output voltage despite variations in input voltage.
- Low dropout voltage: Operates efficiently even when the input voltage is close to the desired output voltage.
- Low quiescent current: Consumes minimal current when no load is connected, conserving power.
- Thermal shutdown protection: Automatically shuts down to prevent damage due to excessive heat.
- Short-circuit protection: Safeguards against short-circuits, protecting the regulator and connected components.
Advantages and Disadvantages
Advantages
- Provides stable and regulated voltage for electronic circuits.
- Small form factor package suitable for space-constrained applications.
- Efficient operation with low dropout voltage.
- Minimal power consumption in standby mode.
- Protection mechanisms against thermal issues and short-circuits.
Disadvantages
- Limited maximum output current of 150mA.
- Input voltage range restricted to 2.5V - 6.0V.
Working Principles
XC6124D316MR-G utilizes a combination of internal circuitry and feedback mechanisms to regulate the output voltage. It compares the output voltage with a reference voltage and adjusts the internal circuitry accordingly to maintain a constant output voltage.
Detailed Application Field Plans
XC6124D316MR-G finds applications in various electronic devices and systems, including but not limited to: - Battery-powered devices - Portable consumer electronics - IoT devices - Wearable devices - Automotive electronics - Industrial control systems
Detailed and Complete Alternative Models
Some alternative models that can be considered as alternatives to XC6124D316MR-G are: - XC6206P332MR-G - LM317T - LT1763-3.3 - MCP1700-3302E/TO
These models offer similar functionality and characteristics, providing options for different design requirements.
Word count: 416 words
Liệt kê 10 câu hỏi và câu trả lời thường gặp liên quan đến ứng dụng XC6124D316MR-G trong giải pháp kỹ thuật
Sure! Here are 10 common questions and answers related to the application of XC6124D316MR-G in technical solutions:
Question: What is XC6124D316MR-G?
- Answer: XC6124D316MR-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is commonly used for monitoring power supply voltages in various electronic devices.Question: What is the operating voltage range of XC6124D316MR-G?
- Answer: The operating voltage range of XC6124D316MR-G is from 0.8V to 6.0V.Question: How does XC6124D316MR-G work?
- Answer: XC6124D316MR-G continuously monitors the input voltage and provides a reset signal when the voltage drops below a certain threshold. This can be used to ensure proper operation of microcontrollers or other sensitive components.Question: What is the typical reset voltage accuracy of XC6124D316MR-G?
- Answer: The typical reset voltage accuracy of XC6124D316MR-G is ±1.5%.Question: Can XC6124D316MR-G be used in battery-powered applications?
- Answer: Yes, XC6124D316MR-G can be used in battery-powered applications as it has a low quiescent current consumption of typically 1.0μA.Question: Does XC6124D316MR-G have any built-in delay time?
- Answer: Yes, XC6124D316MR-G has a built-in delay time of typically 200ms to prevent false resets caused by momentary voltage fluctuations.Question: What is the output type of XC6124D316MR-G?
- Answer: XC6124D316MR-G has an open-drain output type, which allows for flexibility in connecting to different microcontrollers or logic circuits.Question: Can XC6124D316MR-G be used in automotive applications?
- Answer: Yes, XC6124D316MR-G is AEC-Q100 qualified and can be used in automotive applications that require high reliability and performance.Question: What is the operating temperature range of XC6124D316MR-G?
- Answer: The operating temperature range of XC6124D316MR-G is from -40°C to +85°C.Question: Is XC6124D316MR-G available in different package options?
- Answer: Yes, XC6124D316MR-G is available in a SOT-25 package, which is a small surface-mount package commonly used in compact electronic devices.
Please note that the answers provided here are general and may vary depending on the specific application and requirements. It is always recommended to refer to the datasheet and consult with the manufacturer for detailed information.