Torex Semiconductor Ltd
Hình ảnh có thể mang tính chất minh họa.
Xem thông số kỹ thuật để biết chi tiết sản phẩm.
XC6124D622ER-G
Xem chi tiết DataSheets

XC6124D622ER-G

Product Overview

Category

XC6124D622ER-G belongs to the category of voltage regulators.

Use

It is commonly used for regulating voltage in electronic circuits.

Characteristics

  • Package: ER-G package
  • Essence: Voltage regulator
  • Packaging/Quantity: Varies depending on supplier

Specifications

The specifications of XC6124D622ER-G are as follows:

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage: 2.2V
  • Maximum Output Current: 150mA
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 30µA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The pin configuration of XC6124D622ER-G is as follows:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. VOUT: Output voltage pin
  4. CE: Chip enable pin

Functional Features

XC6124D622ER-G offers the following functional features:

  • Low dropout voltage
  • Low quiescent current
  • Overcurrent protection
  • Thermal shutdown protection
  • Short-circuit protection

Advantages and Disadvantages

Advantages: - Low dropout voltage ensures efficient regulation - Low quiescent current minimizes power consumption - Overcurrent, thermal shutdown, and short-circuit protections enhance reliability

Disadvantages: - Limited maximum output current (150mA)

Working Principles

XC6124D622ER-G operates based on a linear voltage regulation principle. It takes an input voltage within the specified range and provides a stable output voltage of 2.2V. The internal circuitry regulates the voltage by adjusting the current flow through the device.

Detailed Application Field Plans

XC6124D622ER-G finds applications in various electronic devices and circuits, including but not limited to: - Battery-powered devices - Portable electronics - IoT devices - Wearable devices

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6124D622ER-G are: - XC6124 series (different output voltage options) - LM1117 series - LT1763 series - MCP1700 series

These alternative models offer similar functionality and can be chosen based on specific requirements and availability.

Word count: 246 words

Liệt kê 10 câu hỏi và câu trả lời thường gặp liên quan đến ứng dụng XC6124D622ER-G trong giải pháp kỹ thuật

Sure! Here are 10 common questions and answers related to the application of XC6124D622ER-G in technical solutions:

  1. Question: What is XC6124D622ER-G?
    - Answer: XC6124D622ER-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is used to monitor the voltage level in electronic circuits.

  2. Question: What is the operating voltage range of XC6124D622ER-G?
    - Answer: The operating voltage range of XC6124D622ER-G is from 0.6V to 6.0V.

  3. Question: How does XC6124D622ER-G work?
    - Answer: XC6124D622ER-G continuously monitors the input voltage and compares it with a preset threshold voltage. When the input voltage drops below the threshold, an internal reset signal is generated.

  4. Question: What is the purpose of using XC6124D622ER-G in technical solutions?
    - Answer: XC6124D622ER-G is commonly used as a power supply monitoring device to ensure stable operation of electronic systems by detecting undervoltage conditions.

  5. Question: Can XC6124D622ER-G be used in battery-powered applications?
    - Answer: Yes, XC6124D622ER-G can be used in battery-powered applications as it operates within a wide voltage range and consumes very low quiescent current.

  6. Question: Does XC6124D622ER-G have any built-in delay function?
    - Answer: Yes, XC6124D622ER-G has a built-in fixed delay time of approximately 200ms to prevent false triggering due to temporary voltage fluctuations.

  7. Question: What is the output configuration of XC6124D622ER-G?
    - Answer: XC6124D622ER-G has an open-drain output configuration, which requires an external pull-up resistor to provide a logic-level signal.

  8. Question: Can XC6124D622ER-G be used in automotive applications?
    - Answer: Yes, XC6124D622ER-G is suitable for automotive applications as it meets the AEC-Q100 automotive reliability standards.

  9. Question: What is the maximum supply current of XC6124D622ER-G?
    - Answer: The maximum supply current of XC6124D622ER-G is typically 1.5µA, making it ideal for low-power applications.

  10. Question: Is XC6124D622ER-G available in different package options?
    - Answer: Yes, XC6124D622ER-G is available in various package options, including SOT-25 and USP-6B, providing flexibility for different design requirements.

Please note that the answers provided here are general and may vary depending on the specific datasheet and application guidelines provided by the manufacturer.