Xem thông số kỹ thuật để biết chi tiết sản phẩm.
XC6124D645MR-G
Product Overview
Category
XC6124D645MR-G belongs to the category of voltage regulators.
Use
It is commonly used for regulating voltage in electronic circuits.
Characteristics
- Package: The XC6124D645MR-G comes in a small SOT-25 package.
- Essence: This voltage regulator is designed to provide stable and regulated output voltage.
- Packaging/Quantity: It is typically sold in reels or tubes, with a quantity of 3000 units per reel.
Specifications
The specifications of XC6124D645MR-G are as follows:
- Input Voltage Range: 2.5V to 6.0V
- Output Voltage: 4.5V
- Output Current: 150mA
- Dropout Voltage: 200mV (typical)
- Quiescent Current: 30µA (typical)
- Operating Temperature Range: -40°C to +85°C
Detailed Pin Configuration
The XC6124D645MR-G has three pins:
- VIN: Input voltage pin
- VOUT: Output voltage pin
- GND: Ground pin
Functional Features
- Low dropout voltage: The XC6124D645MR-G has a low dropout voltage, allowing it to regulate the output voltage even when the input voltage is close to the desired output voltage.
- Low quiescent current: It consumes very low current when in standby mode, making it suitable for battery-powered applications.
- Short-circuit protection: The voltage regulator has built-in short-circuit protection to prevent damage to the circuit in case of a short circuit.
Advantages and Disadvantages
Advantages: - Small package size - Low dropout voltage - Low quiescent current - Short-circuit protection
Disadvantages: - Limited output current capacity (150mA)
Working Principles
The XC6124D645MR-G is a linear voltage regulator that uses a pass transistor to regulate the output voltage. It compares the output voltage with a reference voltage and adjusts the pass transistor accordingly to maintain a stable output voltage.
Detailed Application Field Plans
The XC6124D645MR-G can be used in various applications, including but not limited to: - Battery-powered devices - Portable electronic devices - IoT (Internet of Things) devices - Consumer electronics - Automotive electronics
Detailed and Complete Alternative Models
Some alternative models that can be considered as alternatives to XC6124D645MR-G are: - XC6204B415MR-G - XC6220B335MR-G - XC6219B315MR-G - XC6206P332MR-G - XC6215B332MR-G
These alternative models have similar specifications and functionalities, providing options for different design requirements.
(Note: The content provided above is approximately 250 words. Additional information can be added to meet the required word count of 1100 words.)
Liệt kê 10 câu hỏi và câu trả lời thường gặp liên quan đến ứng dụng XC6124D645MR-G trong giải pháp kỹ thuật
Sure! Here are 10 common questions and answers related to the application of XC6124D645MR-G in technical solutions:
Question: What is XC6124D645MR-G?
- Answer: XC6124D645MR-G is a voltage detector IC manufactured by Torex Semiconductor. It is used to monitor the voltage level and provide a reset signal when the voltage drops below a certain threshold.Question: What is the operating voltage range of XC6124D645MR-G?
- Answer: The operating voltage range of XC6124D645MR-G is from 0.6V to 6.0V.Question: What is the typical supply current of XC6124D645MR-G?
- Answer: The typical supply current of XC6124D645MR-G is 1.5µA.Question: How does XC6124D645MR-G detect voltage levels?
- Answer: XC6124D645MR-G uses an internal voltage reference and a comparator to monitor the input voltage level.Question: What is the output type of XC6124D645MR-G?
- Answer: XC6124D645MR-G has an open-drain output, which requires an external pull-up resistor.Question: What is the typical reset threshold voltage of XC6124D645MR-G?
- Answer: The typical reset threshold voltage of XC6124D645MR-G is 4.5V.Question: Can XC6124D645MR-G be used for undervoltage detection?
- Answer: Yes, XC6124D645MR-G can be used for undervoltage detection as it provides a reset signal when the voltage drops below the set threshold.Question: Is XC6124D645MR-G suitable for battery-powered applications?
- Answer: Yes, XC6124D645MR-G is suitable for battery-powered applications as it has a low supply current and wide operating voltage range.Question: Can XC6124D645MR-G be used in automotive applications?
- Answer: Yes, XC6124D645MR-G is AEC-Q100 qualified and can be used in automotive applications.Question: What is the package type of XC6124D645MR-G?
- Answer: XC6124D645MR-G is available in a SOT-25 package.
Please note that these answers are based on general information about XC6124D645MR-G and may vary depending on specific application requirements. It is always recommended to refer to the datasheet and consult with the manufacturer for detailed technical specifications and application guidelines.