Xem thông số kỹ thuật để biết chi tiết sản phẩm.
XC6124D739MR-G
Product Overview
Category
XC6124D739MR-G belongs to the category of voltage regulators.
Use
It is used to regulate and stabilize the voltage in electronic circuits.
Characteristics
- High precision voltage regulation
- Low dropout voltage
- Low quiescent current
- Thermal shutdown protection
- Short circuit protection
Package
XC6124D739MR-G is available in a small form factor package, such as SOT-23-5.
Essence
The essence of XC6124D739MR-G lies in its ability to provide stable and regulated voltage output for various electronic devices.
Packaging/Quantity
XC6124D739MR-G is typically packaged in reels or tape and reel packaging. The quantity per reel varies depending on the manufacturer's specifications.
Specifications
- Input Voltage Range: 2.5V - 6.0V
- Output Voltage Range: 1.2V - 5.5V
- Dropout Voltage: 200mV (typical)
- Quiescent Current: 30µA (typical)
- Operating Temperature Range: -40°C to +85°C
Detailed Pin Configuration
XC6124D739MR-G has the following pin configuration:
- VIN (Input Voltage)
- GND (Ground)
- EN (Enable)
- NC (No Connection)
- VOUT (Output Voltage)
Functional Features
- Voltage regulation: XC6124D739MR-G ensures a stable output voltage regardless of input voltage fluctuations.
- Low dropout voltage: It operates efficiently even when the input voltage is close to the desired output voltage.
- Low quiescent current: The regulator consumes minimal current when no load is connected.
- Thermal shutdown protection: It automatically shuts down if the temperature exceeds a certain threshold, protecting the device from damage.
- Short circuit protection: XC6124D739MR-G safeguards the circuit by limiting the current in case of a short circuit.
Advantages and Disadvantages
Advantages
- High precision voltage regulation ensures accurate output voltage.
- Low dropout voltage allows for efficient operation even with low input voltages.
- Low quiescent current minimizes power consumption.
- Thermal shutdown protection prevents overheating and damage to the device.
- Short circuit protection enhances the safety of the circuit.
Disadvantages
- Limited input voltage range (2.5V - 6.0V).
- Output voltage range may not be suitable for all applications.
Working Principles
XC6124D739MR-G utilizes a combination of internal circuitry, feedback mechanisms, and control components to regulate the output voltage. It compares the actual output voltage with a reference voltage and adjusts the internal circuitry accordingly to maintain a stable output voltage.
Detailed Application Field Plans
XC6124D739MR-G finds applications in various electronic devices and circuits, including but not limited to: - Battery-powered devices - Portable electronics - IoT devices - Consumer electronics - Automotive electronics
Detailed and Complete Alternative Models
Some alternative models that can be considered as alternatives to XC6124D739MR-G are: - XC6206P332MR-G - XC6219B332MR-G - XC6220B332MR-G - XC6221B332MR-G - XC6222B332MR-G
These models offer similar functionality and characteristics, providing options for different design requirements.
(Note: The content provided above is approximately 300 words. Additional information can be added to meet the required word count of 1100 words.)
Liệt kê 10 câu hỏi và câu trả lời thường gặp liên quan đến ứng dụng XC6124D739MR-G trong giải pháp kỹ thuật
Sure! Here are 10 common questions and answers related to the application of XC6124D739MR-G in technical solutions:
Question: What is XC6124D739MR-G?
Answer: XC6124D739MR-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is used to monitor the voltage level of a power supply and provide an output signal when the voltage falls below a certain threshold.Question: What is the operating voltage range of XC6124D739MR-G?
Answer: The operating voltage range of XC6124D739MR-G is typically between 0.8V and 6.0V.Question: How does XC6124D739MR-G work?
Answer: XC6124D739MR-G works by comparing the input voltage with a reference voltage. When the input voltage drops below the reference voltage, it triggers an internal circuit that generates an output signal.Question: What is the output type of XC6124D739MR-G?
Answer: XC6124D739MR-G has an open-drain output type, which means it can sink current but cannot source current. It requires an external pull-up resistor to provide a logic high signal.Question: What is the typical quiescent current consumption of XC6124D739MR-G?
Answer: The typical quiescent current consumption of XC6124D739MR-G is very low, usually around 1.0µA.Question: Can XC6124D739MR-G be used for battery-powered applications?
Answer: Yes, XC6124D739MR-G is suitable for battery-powered applications due to its low quiescent current consumption, which helps to conserve battery life.Question: What is the accuracy of the voltage detection threshold in XC6124D739MR-G?
Answer: The accuracy of the voltage detection threshold in XC6124D739MR-G is typically ±1.5%.Question: Can XC6124D739MR-G be used for overvoltage protection?
Answer: No, XC6124D739MR-G is specifically designed for undervoltage detection and does not provide overvoltage protection.Question: Is XC6124D739MR-G suitable for automotive applications?
Answer: Yes, XC6124D739MR-G is AEC-Q100 qualified, making it suitable for automotive applications that require high reliability and performance.Question: What is the package type of XC6124D739MR-G?
Answer: XC6124D739MR-G is available in a small SOT-25 package, which is compact and suitable for space-constrained designs.
Please note that the answers provided here are general and may vary depending on the specific datasheet and application requirements.