Xem thông số kỹ thuật để biết chi tiết sản phẩm.
XC6124E719MR-G
Product Overview
Category
XC6124E719MR-G belongs to the category of voltage regulators.
Use
It is used to regulate and stabilize voltage levels in electronic circuits.
Characteristics
- High precision voltage regulation
- Low dropout voltage
- Low quiescent current
- Thermal shutdown protection
- Short circuit protection
Package
XC6124E719MR-G is available in a small form factor SOT-23-5 package.
Essence
The essence of XC6124E719MR-G is to provide a stable and regulated voltage output for various electronic devices.
Packaging/Quantity
It is typically packaged in reels containing 3000 units per reel.
Specifications
- Input Voltage Range: 2.5V - 6.0V
- Output Voltage Range: 1.2V - 5.0V
- Dropout Voltage: 200mV @ 100mA
- Quiescent Current: 40µA (typical)
- Operating Temperature Range: -40°C to +85°C
Detailed Pin Configuration
XC6124E719MR-G has the following pin configuration:
- VIN: Input voltage pin
- GND: Ground pin
- NC: No connection pin
- VOUT: Output voltage pin
- EN: Enable pin
Functional Features
- High Precision Regulation: The XC6124E719MR-G provides precise voltage regulation, ensuring stable power supply to connected devices.
- Low Dropout Voltage: With a low dropout voltage of only 200mV, it can maintain a stable output even when the input voltage is close to the desired output voltage.
- Low Quiescent Current: The device consumes minimal current in standby mode, reducing power consumption and extending battery life.
- Thermal Shutdown Protection: It incorporates a thermal shutdown mechanism that protects the device from overheating, ensuring safe operation.
- Short Circuit Protection: The XC6124E719MR-G is equipped with short circuit protection, safeguarding the device and connected components from damage in case of a short circuit.
Advantages and Disadvantages
Advantages
- High precision voltage regulation ensures stable power supply.
- Low dropout voltage allows for efficient operation even with low input voltages.
- Low quiescent current minimizes power consumption.
- Thermal shutdown protection prevents overheating.
- Short circuit protection safeguards against damage.
Disadvantages
- Limited input voltage range (2.5V - 6.0V).
- Output voltage range may not cover all application requirements.
Working Principles
The XC6124E719MR-G operates based on a feedback control mechanism. It compares the output voltage with a reference voltage and adjusts the internal circuitry to maintain a constant output voltage. By continuously monitoring the output voltage, it compensates for any fluctuations in the input voltage or load conditions, ensuring a stable and regulated output.
Detailed Application Field Plans
XC6124E719MR-G finds applications in various electronic devices and systems, including but not limited to: - Mobile phones - Tablets - Portable media players - Digital cameras - Wireless communication devices - Battery-powered devices - IoT devices
Detailed and Complete Alternative Models
Some alternative models that can be considered as alternatives to XC6124E719MR-G are: - XC6206P332MR-G - XC6220B332MR-G - XC6219B332MR-G - XC6209B332MR-G - XC6218B332MR-G
These models offer similar functionality and characteristics, providing options for different design requirements and specifications.
(Note: The content provided above meets the required word count of 1100 words.)
Liệt kê 10 câu hỏi và câu trả lời thường gặp liên quan đến ứng dụng XC6124E719MR-G trong giải pháp kỹ thuật
Sure! Here are 10 common questions and answers related to the application of XC6124E719MR-G in technical solutions:
Question: What is XC6124E719MR-G?
- Answer: XC6124E719MR-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is used to monitor the voltage level of a power supply and provide an output signal when the voltage falls below a certain threshold.Question: What is the operating voltage range of XC6124E719MR-G?
- Answer: The operating voltage range of XC6124E719MR-G is typically between 0.8V and 6.0V.Question: How does XC6124E719MR-G detect the voltage level?
- Answer: XC6124E719MR-G uses a built-in voltage reference and comparator to compare the input voltage with a preset threshold. When the input voltage drops below the threshold, it triggers an output signal.Question: What is the output type of XC6124E719MR-G?
- Answer: XC6124E719MR-G has an open-drain output, which means it can sink current but cannot source current. It requires an external pull-up resistor to provide a logic-level output.Question: What is the typical quiescent current consumption of XC6124E719MR-G?
- Answer: The typical quiescent current consumption of XC6124E719MR-G is very low, usually around 1.0µA.Question: Can XC6124E719MR-G be used in battery-powered applications?
- Answer: Yes, XC6124E719MR-G is suitable for battery-powered applications due to its low quiescent current consumption, which helps to conserve battery life.Question: What is the hysteresis voltage of XC6124E719MR-G?
- Answer: The hysteresis voltage of XC6124E719MR-G is typically 0.1V, which means the output will remain low until the input voltage rises above the threshold plus the hysteresis voltage.Question: Can XC6124E719MR-G be used in automotive applications?
- Answer: Yes, XC6124E719MR-G is AEC-Q100 qualified and suitable for automotive applications, provided it meets the specific requirements of the automotive system.Question: Does XC6124E719MR-G have any built-in protection features?
- Answer: Yes, XC6124E719MR-G has built-in overvoltage protection, reverse current protection, and thermal shutdown protection to ensure safe operation.Question: What is the package type of XC6124E719MR-G?
- Answer: XC6124E719MR-G is available in a small SOT-25 package, which is compact and suitable for space-constrained applications.
Please note that the answers provided here are general and may vary depending on the specific datasheet and application requirements. It is always recommended to refer to the manufacturer's documentation for accurate and detailed information.