Torex Semiconductor Ltd
Hình ảnh có thể mang tính chất minh họa.
Xem thông số kỹ thuật để biết chi tiết sản phẩm.
XC6124E733ER-G
Xem chi tiết DataSheets

XC6124E733ER-G

Product Overview

Category

XC6124E733ER-G belongs to the category of voltage regulators.

Use

It is primarily used for regulating voltage in electronic circuits.

Characteristics

  • Compact size
  • High efficiency
  • Low dropout voltage
  • Wide input voltage range
  • Overcurrent protection
  • Thermal shutdown protection

Package

XC6124E733ER-G is available in a small surface-mount package.

Essence

The essence of XC6124E733ER-G lies in its ability to provide stable and regulated voltage output, ensuring proper functioning of electronic devices.

Packaging/Quantity

XC6124E733ER-G is typically packaged in reels or tubes, with a quantity of 3000 units per reel/tube.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage: 3.3V
  • Dropout Voltage: 200mV (typical)
  • Maximum Output Current: 150mA
  • Quiescent Current: 30µA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6124E733ER-G has the following pin configuration:

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. VOUT (Output Voltage)

Functional Features

  • Voltage regulation: XC6124E733ER-G ensures a stable output voltage regardless of input voltage fluctuations.
  • Overcurrent protection: It safeguards the circuit by limiting the output current in case of excessive load.
  • Thermal shutdown protection: It prevents overheating by shutting down the regulator when the temperature exceeds a certain threshold.

Advantages and Disadvantages

Advantages

  • Small form factor allows for space-saving designs.
  • High efficiency results in minimal power dissipation.
  • Wide input voltage range accommodates various power sources.
  • Overcurrent and thermal protection enhance circuit reliability.

Disadvantages

  • Limited maximum output current may not be suitable for high-power applications.
  • Dropout voltage may affect performance in low input voltage scenarios.

Working Principles

XC6124E733ER-G operates based on the principle of feedback control. It compares the output voltage with a reference voltage and adjusts the internal circuitry to maintain a constant output voltage, compensating for changes in input voltage and load conditions.

Detailed Application Field Plans

XC6124E733ER-G finds applications in various electronic devices, including but not limited to: - Portable consumer electronics - Battery-powered devices - IoT devices - Wearable devices - Industrial automation systems

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6124E733ER-G are: - XC6206P332MR-G - LM1117IMPX-3.3/NOPB - MCP1700T-3302E/TT

These models offer similar voltage regulation capabilities and can be used as substitutes depending on specific requirements.

Word count: 345 words

Liệt kê 10 câu hỏi và câu trả lời thường gặp liên quan đến ứng dụng XC6124E733ER-G trong giải pháp kỹ thuật

Sure! Here are 10 common questions and answers related to the application of XC6124E733ER-G in technical solutions:

  1. Question: What is XC6124E733ER-G?
    - Answer: XC6124E733ER-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is commonly used for monitoring power supply voltages in various electronic devices.

  2. Question: What is the operating voltage range of XC6124E733ER-G?
    - Answer: The operating voltage range of XC6124E733ER-G is typically between 0.8V and 6.0V.

  3. Question: What is the output type of XC6124E733ER-G?
    - Answer: XC6124E733ER-G has an open-drain output type, which means it can sink current but cannot source current.

  4. Question: What is the typical quiescent current consumption of XC6124E733ER-G?
    - Answer: The typical quiescent current consumption of XC6124E733ER-G is very low, usually around 1.0µA.

  5. Question: How does XC6124E733ER-G detect voltage levels?
    - Answer: XC6124E733ER-G uses an internal voltage reference to compare the input voltage with a preset threshold. When the input voltage falls below the threshold, the output of the IC becomes active.

  6. Question: Can XC6124E733ER-G be used for undervoltage detection?
    - Answer: Yes, XC6124E733ER-G is commonly used for undervoltage detection. It can trigger an alert or shutdown sequence when the input voltage drops below a certain level.

  7. Question: What is the hysteresis feature of XC6124E733ER-G?
    - Answer: XC6124E733ER-G has a built-in hysteresis feature that prevents output oscillation near the threshold voltage. It ensures stable operation and avoids false triggering.

  8. Question: What is the maximum operating temperature range of XC6124E733ER-G?
    - Answer: The maximum operating temperature range of XC6124E733ER-G is typically between -40°C and 85°C.

  9. Question: Can XC6124E733ER-G be used in battery-powered applications?
    - Answer: Yes, XC6124E733ER-G is suitable for battery-powered applications due to its low quiescent current consumption and wide operating voltage range.

  10. Question: Is XC6124E733ER-G available in different package options?
    - Answer: Yes, XC6124E733ER-G is available in various package options, including SOT-25 and USP-6B, providing flexibility for different design requirements.

Please note that the answers provided here are general and may vary depending on specific datasheet specifications and application requirements.