NTCLE213E3104JXT1

Introduction

NTCLE213E3104JXT1 is a thermistor belonging to the category of electronic components used for temperature sensing and control in various applications. This entry provides an overview of its basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

Basic Information Overview

• Category: Thermistor
• Use: Temperature sensing and control
• Characteristics: High sensitivity to temperature changes, small size, and low cost
• Package: Radial leaded
• Essence: Reliable temperature measurement and control
• Packaging/Quantity: Available in tape and reel packaging, quantity varies by supplier

Specifications

• Resistance at 25°C: 100 kΩ
• Tolerance: ±5%
• Operating Temperature Range: -55°C to 150°C
• Thermal Time Constant: 10 seconds (in still air)
• Maximum Power Dissipation: 200 mW

Detailed Pin Configuration

The NTCLE213E3104JXT1 thermistor has two radial leads with standard spacing. The pinout configuration is as follows: - Pin 1: Connected to one end of the thermistor element - Pin 2: Connected to the other end of the thermistor element

Functional Features

• Temperature Sensing: Provides accurate resistance changes with temperature variations
• Compact Size: Suitable for space-constrained applications
• Fast Response: Rapid reaction to temperature changes
• Reliable Performance: Consistent and stable temperature measurements

Advantages and Disadvantages

Advantages

• High sensitivity to temperature changes
• Small form factor
• Cost-effective solution for temperature sensing and control

Disadvantages

• Limited operating temperature range compared to some other thermistors
• Tolerance of ±5% may require calibration in precision applications

Working Principles

The NTCLE213E3104JXT1 operates based on the negative temperature coefficient (NTC) principle, where its resistance decreases as the temperature increases. This characteristic allows it to be used for temperature measurement and control in various electronic systems.

Detailed Application Field Plans

The NTCLE213E3104JXT1 finds extensive use in the following application fields: 1. Temperature Monitoring: Used in consumer electronics, industrial equipment, and automotive systems for monitoring temperature variations. 2. Temperature Control: Employed in HVAC systems, battery management, and power supply units for regulating temperature. 3. Medical Devices: Integrated into medical equipment for temperature sensing and patient monitoring.

Detailed and Complete Alternative Models

Some alternative models to NTCLE213E3104JXT1 include: 1. NTCLE100E3103JB0: Similar characteristics with a different resistance value 2. NTCLE203E3103SB0: Higher precision variant with tighter tolerance 3. NTCLE413E2103GB0: Extended temperature range for specialized applications

In conclusion, the NTCLE213E3104JXT1 thermistor offers reliable temperature sensing and control capabilities in a compact and cost-effective package. Its high sensitivity and fast response make it suitable for a wide range of applications, despite its limitations in operating temperature range and tolerance. Understanding its specifications, pin configuration, functional features, and alternative models can aid in effectively integrating this thermistor into various electronic systems.

Word Count: 497