Xem thông số kỹ thuật để biết chi tiết sản phẩm.
MBRB25H35CTHE3_A/P
Product Overview
Category
The MBRB25H35CTHE3_A/P belongs to the category of Schottky Barrier Rectifiers.
Use
It is commonly used in power supply applications, voltage clamping, and reverse polarity protection.
Characteristics
- High current capability
- Low forward voltage drop
- Fast switching speed
- High reliability
Package
The MBRB25H35CTHE3_A/P is typically available in a TO-263AB package.
Essence
This rectifier is essential for converting alternating current (AC) to direct current (DC) efficiently.
Packaging/Quantity
It is usually packaged in reels or tubes and is available in various quantities depending on the supplier.
Specifications
- Maximum Average Forward Current: 25A
- Reverse Voltage: 35V
- Forward Voltage Drop: 0.55V at 12.5A
- Operating Temperature Range: -65°C to +175°C
- Storage Temperature Range: -65°C to +175°C
Detailed Pin Configuration
The MBRB25H35CTHE3_A/P typically has three pins: 1. Anode 2. Cathode 3. Gate (for some models)
Functional Features
- Low power loss
- High efficiency
- High surge capability
- Guard ring for enhanced ruggedness and long-term reliability
Advantages and Disadvantages
Advantages
- Fast recovery time
- Low leakage current
- High temperature operation capability
Disadvantages
- Higher cost compared to standard diodes
- Sensitive to voltage spikes
Working Principles
The MBRB25H35CTHE3_A/P operates based on the Schottky barrier principle, where a metal-semiconductor junction forms a low forward voltage drop during conduction.
Detailed Application Field Plans
Power Supplies
The rectifier is widely used in power supply units for various electronic devices and equipment.
Voltage Clamping
It is utilized for voltage clamping applications to protect sensitive components from overvoltage conditions.
Reverse Polarity Protection
In circuits where reverse polarity protection is crucial, this rectifier provides an effective solution.
Detailed and Complete Alternative Models
- MBRB20H35CTHE3_A/P
- MBRB30H35CTHE3_A/P
- MBRB40H35CTHE3_A/P
In conclusion, the MBRB25H35CTHE3_A/P Schottky Barrier Rectifier offers high performance and reliability in power supply and voltage clamping applications. Its fast switching speed and low forward voltage drop make it a preferred choice for many electronic designs.
[Word count: 387]
Liệt kê 10 câu hỏi và câu trả lời thường gặp liên quan đến ứng dụng MBRB25H35CTHE3_A/P trong giải pháp kỹ thuật
Sure, here are 10 common questions and answers related to the application of MBRB25H35CTHE3_A/P in technical solutions:
What is the maximum continuous forward current for MBRB25H35CTHE3_A/P?
- The maximum continuous forward current for MBRB25H35CTHE3_A/P is 25A.
What is the reverse voltage rating for MBRB25H35CTHE3_A/P?
- The reverse voltage rating for MBRB25H35CTHE3_A/P is 35V.
Can MBRB25H35CTHE3_A/P be used in high-frequency applications?
- Yes, MBRB25H35CTHE3_A/P is suitable for high-frequency applications due to its fast switching characteristics.
What is the typical forward voltage drop for MBRB25H35CTHE3_A/P at a certain current?
- The typical forward voltage drop for MBRB25H35CTHE3_A/P is around 0.55V at 25A.
Is MBRB25H35CTHE3_A/P suitable for use in power supplies?
- Yes, MBRB25H35CTHE3_A/P is commonly used in power supply applications due to its high current capability and low forward voltage drop.
Does MBRB25H35CTHE3_A/P require a heatsink for certain applications?
- Depending on the specific application and operating conditions, a heatsink may be required to ensure proper thermal management.
What is the junction temperature range for MBRB25H35CTHE3_A/P?
- The junction temperature range for MBRB25H35CTHE3_A/P is typically -55°C to +175°C.
Can MBRB25H35CTHE3_A/P be used in automotive electronics applications?
- Yes, MBRB25H35CTHE3_A/P is suitable for automotive electronics applications due to its rugged construction and high reliability.
What are the recommended storage conditions for MBRB25H35CTHE3_A/P?
- It is recommended to store MBRB25H35CTHE3_A/P in a dry environment at temperatures between -55°C and +175°C.
Are there any special handling considerations for MBRB25H35CTHE3_A/P during assembly?
- Care should be taken to avoid mechanical stress and electrostatic discharge during the assembly process to ensure the reliability of MBRB25H35CTHE3_A/P in the final product.
I hope these questions and answers are helpful for your technical solutions involving MBRB25H35CTHE3_A/P! Let me know if you need further assistance.