Xem thông số kỹ thuật để biết chi tiết sản phẩm.
IRFR9024PBF
Product Overview
Category: Power MOSFET
Use: Switching applications
Characteristics: High voltage, low on-resistance
Package: TO-252
Essence: Power transistor for switching applications
Packaging/Quantity: Tape & Reel, 2500 units per reel
Specifications
- Voltage Rating: 55V
- Continuous Drain Current: 11A
- RDS(ON): 0.085 Ohm
- Gate Threshold Voltage: 2V to 4V
- Power Dissipation: 2.5W
Detailed Pin Configuration
- Gate (G)
- Drain (D)
- Source (S)
Functional Features
- Low on-resistance
- Fast switching speed
- High input impedance
- Low gate charge
Advantages and Disadvantages
Advantages: - Low on-resistance allows for efficient power management - Fast switching speed reduces power loss - High input impedance enables easy drive circuit design
Disadvantages: - Sensitive to static electricity - Limited voltage rating compared to some alternatives
Working Principles
The IRFR9024PBF operates based on the principle of field-effect transistors, where the flow of current between the drain and source terminals is controlled by the voltage applied to the gate terminal.
Detailed Application Field Plans
The IRFR9024PBF is commonly used in various switching applications such as power supplies, motor control, and LED lighting. Its high efficiency and fast switching speed make it suitable for applications requiring high-frequency switching.
Detailed and Complete Alternative Models
IRF540PBF
- Voltage Rating: 100V
- Continuous Drain Current: 33A
- RDS(ON): 0.077 Ohm
- Package: TO-220
IRF3205PBF
- Voltage Rating: 55V
- Continuous Drain Current: 110A
- RDS(ON): 0.008 Ohm
- Package: TO-220
IRF9540PBF
- Voltage Rating: 100V
- Continuous Drain Current: 23A
- RDS(ON): 0.117 Ohm
- Package: TO-220
In conclusion, the IRFR9024PBF is a power MOSFET designed for efficient switching applications, offering low on-resistance and fast switching speed. While it has certain limitations, its performance characteristics make it suitable for a wide range of applications in power electronics.
Word Count: 311
Liệt kê 10 câu hỏi và câu trả lời thường gặp liên quan đến ứng dụng IRFR9024PBF trong giải pháp kỹ thuật
What is the IRFR9024PBF?
- The IRFR9024PBF is a power MOSFET transistor designed for various electronic applications, including power management and switching circuits.
What is the maximum drain-source voltage of the IRFR9024PBF?
- The maximum drain-source voltage of the IRFR9024PBF is 55 volts.
What is the maximum continuous drain current of the IRFR9024PBF?
- The maximum continuous drain current of the IRFR9024PBF is 11 amperes.
What is the typical on-state resistance of the IRFR9024PBF?
- The typical on-state resistance of the IRFR9024PBF is 0.19 ohms.
What are some common applications of the IRFR9024PBF?
- Common applications of the IRFR9024PBF include power supplies, motor control, and DC-DC converters.
What is the gate-source voltage range for proper operation of the IRFR9024PBF?
- The gate-source voltage range for proper operation of the IRFR9024PBF is -20 to +20 volts.
Is the IRFR9024PBF suitable for high-frequency switching applications?
- Yes, the IRFR9024PBF is suitable for high-frequency switching applications due to its fast switching characteristics.
Does the IRFR9024PBF require a heatsink for certain applications?
- Depending on the specific application and power dissipation, the IRFR9024PBF may require a heatsink to ensure proper thermal management.
What are the thermal characteristics of the IRFR9024PBF?
- The thermal resistance from junction to ambient (RθJA) of the IRFR9024PBF is typically around 62°C/W.
Are there any recommended operating conditions or precautions when using the IRFR9024PBF?
- It is important to adhere to the specified operating conditions, such as voltage and current limits, and to consider proper heat dissipation to ensure reliable performance of the IRFR9024PBF in technical solutions.