onsemi (Ansemi)
Hình ảnh có thể mang tính chất minh họa.
Xem thông số kỹ thuật để biết chi tiết sản phẩm.
MC100E111FNR2G 9 Differential Clock/Data Fanout Buffers

MC100E111FNR2G

9 Differential Clock/Data Fanout Buffers
Mã sản phẩm
MC100E111FNR2G
Loại
RTC/Clock Chip > Clock Buffer, Driver
Nhà sản xuất/Thương hiệu
onsemi (Ansemi)
đóng gói
PLCC-28
đóng gói
taping
Số lượng gói
500
Sự miêu tả
The MC10E/100E111 is a low skew 1:9 dual differential driver designed with clock distribution in mind. It accepts one signal input, which can be differential or single-ended (if using the VBB output). Signals are distributed as 9 identical differential outputs. An enable input is also provided. A high forces all Q outputs low and all Qbar outputs high, disabling the device. The device was specifically designed, modeled, and produced with low skew as the primary goal. Optimized design and layout help minimize gate-to-gate skew within the device, using empirical modeling to determine process control limits and ensure consistent tpd distribution from lot to lot. A reliable guaranteed low warpage device is thus produced. To ensure compliance with the tight skew specification, both sides of the differential output are equally terminated to 50Ω, even if only one side is used. In most applications, all nine differential pairs will be used and therefore terminated. If nine pairs are not required, at least one output pair needs to be terminated on the same package side (ie, share the same VCCO) as the pair to be used in order to maintain a minimum skew. Failure to do so will result in a small degradation (in the order of 10-20 ps) of the output propagation delay used, which, while not a big deal for most designs, will mean a loss of skew margin. Only the VBB pin, the internally generated supply voltage, is provided for this device. In the case of single-ended inputs, tie the unused differential input to VBB as the switch reference voltage. VBB can also re-bias the AC-coupled input. When used, decouple VBB and VCC with 0.01 μF capacitors and limit current source or sink to 0.5 mA. VBB should be left open when not in use. The 100 Series includes temperature compensation.
Yêu cầu báo giá
Vui lòng hoàn thành tất cả các trường bắt buộc và nhấp vào "SUBMIT", chúng tôi sẽ liên hệ với bạn sau 12 giờ qua email. Nếu bạn có bất kỳ vấn đề gì, vui lòng để lại tin nhắn hoặc gửi email đến [email protected], chúng tôi sẽ phản hồi sớm nhất có thể.
Trong kho 61888 PCS
Thông tin liên lạc
Từ khóa của MC100E111FNR2G
MC100E111FNR2G Linh kiện điện tử
MC100E111FNR2G Việc bán hàng
MC100E111FNR2G Nhà cung cấp
MC100E111FNR2G Nhà phân phối
MC100E111FNR2G Bảng dữ liệu
MC100E111FNR2G Ảnh
MC100E111FNR2G Giá
MC100E111FNR2G Lời đề nghị
MC100E111FNR2G Giá thấp nhất
MC100E111FNR2G Tìm kiếm
MC100E111FNR2G Thu mua
MC100E111FNR2G Chip